IC11S-68PL-1.27SF-EJR Datasheet, PDF (1/38 Pages) Hirose Electric – Single Slot SMT Connectors For Card-Bus Based PC Cards

Single Slot SMT Connectors For Card-Bus Based PC Cards
IC11S Series
PC Card Standard Compliant
Reduced height : 5.6mm high
sFeatures
1. PC Card Standard compliant:
• Grounding is required to meet the high speed signal
requrements of the PC card standard. Grounding reliability is
achieved with a grounding plate and 8 grounding contacts.
• Type 1, type 2 and type 3 cards are covered.
• Terminals for ground clipping are provided.
2. Space saving
Smaller size reduces occupied area on PC boards as
compared to previous products.
3. Reduced Height:
Connector height is minimized to 5.6mm, making possible
thinner product designs.
4. Eject mechanism with high-level functionality
Hirose Electric's original ejection mechanism provides an
higher degree of card ejection over existing products. This
improves the operational qualities of card removal. (Patents
pending)
5. Wide Variety of Options Available
• Standard type mounts to the top of the PC board and reverse
type mounts on the underside of the board
• Three types of eject buttons; rigid, flexible and POP-UP.All
types can be installed on the right or left side of the ejector.
• Available with standoff to utilize space under the connector for
mounting other parts.
6. Light-weight
Weight of 12.7g for normal button type helps achieve the
reduced weight required in today’s products.
Wide variety of options
(1)Board Mounting
➀Standard type
➁Reverse type
(2)Types of eject button
➀Rigid button
➁Foldering button
➂Pop-up button
(3)Position of eject buttons
➀Right
➁Left
(4)Standoffs
➀None
➁2.2mm
A2