FH33-28S-0.5SH Datasheet, PDF (2/16 Pages) Hirose Electric – 0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

FH33 Seriesq0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
sProduct Specifications
Ratings
Current rating 0.5 A
(0.4mm pitch type 0.4A)
Voltage rating 50 V AC
(0.4mm pitch type 40V AC)
Operating temperature range -55 ç to +85ç (Note 1) Storage temperature range -10ç to +50ç (Note 2)
Operating humidity range Relative humidity 90% max. Storage humidity range Relative humidity 90% max.
(No condensation)
(No condensation)
Recommended FPC
Thickness = 0.3 ± 0.05mm gold plated (under 30 pos.), 0.3 ± 0.03mm gold plated (over 31 pos.)
Item
Specification
1. Insulation resistance 500 Mø min.
2. Withstanding voltage
3. Contact resistance
No flashover or insulation breakdown.
50 mø max.
100 mø max(0.4mm pitch type).
* Including FPC conductor resistance
4. Durability
(insertion/ withdrawal)
Contact resistance: 50 mø max.
100 mø max(0.4mm pitch type).
No damage, cracks, or parts dislocation.
5. Vibration
6. Shock
No electrical discontinuity of 1µs or more.
Contact resistance: 50 mø max.
100 mø max(0.4mm pitch type).
No damage, cracks, or parts dislocation.
Conditions
100 V DC
150 V AC /one minute, 120 V AC /one minute(0.4mm pitch type)
1 mA
20 cycles
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles in
each of the 3 directions.
Acceleration of 981 m/s², 6 ms duration, sine half-wave waveform,
3 cycles in each of the 3 axis
7. Humidity
(Steady state)
8. Temperature cycle
9. Resistance to
soldering heat
Contact resistance: 50 mø max.
100 mø max(0.4mm pitch type).
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation.
No deformation of components affecting performance.
96 hours at 40ç and humidity of 90% to 95%.
Temperature : -55ç/+15ç to +35ç/+85ç/+15ç to +35ç
Time
: 30 / 2 to 3 / 30 / 2 to 3 (Minutes)
5 cycles
Reflow
: At the recommended temperature profile
Manual soldering: 350ç ± 10ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series.
Contact us for the drawings and specifications for a specific part number shown.
sMaterials
Part
FH33 series
Insulator
FH33J series
FH33M series
FH33MHJ series
Contacts
Metalfittings
Material
PA
LCP
PPS
LCP
PA
LCP
PPS
Phosphor bronze
Finish
Color:Beige
Color:Deep brown
Color:Beige
Color:Black
Color:Beige
Color:Deep brown
Color:Beige
Color:Black
Gold flash plated
Pure tin reflow plated
Remarks
UL94V-0
-----
-----
sOrdering information
FH 33 M H J - 12 (6) S B - 1 SH (10)
1
2 3 45
6 7 89
10 11
12
1 Series name:FH
2 Series No:33
3 Blank:0.5mm pitch,1mm pitch
M:0.4mm pitch
4 Blank:Width 3.0mm(standard)
H:Width 3.5mm(long actuator type)
5 Blank:Standard
J:Halogen-free
Flame retardance UL94V-0
6 Standard type:Nomber of contacts
Eccentric type:Number of contacts in
1mm housing
7 Standard type:Blank
Eccentric type:Nomber of contacts
8 Contact alignment:S: single
9 Eccentric direction:
Blank:standard type
B:Eccentric type
10 Contact pitch:
0.4mm,0.5mm,1mm
11 SH:SMT horizontal mounting
12 Plating specifications:
Blank:Gold plated
(10) Gold plated with
nickel barrier
2