FH33-28S-0.5SH Datasheet, PDF (11/16 Pages) Hirose Electric – 0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

FH33 Seriesq0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
sOperation and Precautions
Operation
1.FPC insertion procedure. Connector installed on the board.
1 Lift up the actuator. Use thumb or index finger.
2 Fully insert the FPC in the connector parallel to
mounting surface, with the exposed conductive
traces facing down.
3 Rotate down the actuator until firmly closed. It is
critical that the inserted FPC is not moved and
remains fully inserted.
FPC conductor
surface (Bottom side)
2.FPC removal
1 Lift up the actuator. Carefully withdraw the
FPC.
11