FH12-6S-0.5SH Datasheet, PDF (18/19 Pages) Hirose Electric – 0.5mm and 1mm Pitch Connectors For FPC/FFC

Reel Dimensions (Common to All Types)
End portion
Mounting portion
Lead portion (400mm min.)
Blank portion
(10 pockets min.)
Embossed carrier tape
Blank portion
(10 pockets min.)
Top cover tape
BRecommended Temperature Profile
HRS test conditions
Solder method
:Reflow, IR/hot air
(Nihon Den-netsu Co., Ltd.’s
Part Number: SENSBY NR-2)
Environment:
:Room air
Solder composition :Paste, 63%Sn/37%Pb
(Senju Metal Industry, Co., Ltd.’s
Part Number: OZ63-201C-50-9)
Test board
:Glass epoxy 40mm∞80mm∞1.6mm thick
Land dimensions :Top and bottom
contact type 0.3mm∞1.3mm
Vertical mounting type 0.6mm∞1.5mm
Metal mask
:Top and bottom contact type
0.25mm∞1.3mm∞0.15mm thick
Vertical mounting type
0.25mm∞1.5mm∞0.15mm thick
This temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
23