FH28 Datasheet, PDF (1/11 Pages) Hirose Electric – 0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

0.5 mm Pitch, 2.55 mm above the board,
Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
FH28 Series
Secure actuator lock and retention
Hold in place by metal fittings
Actuator color: Dark brown
Hold in place by contacts
sOverview
Continuing market trends demand higher contact count
connectors while maintaining high electrical/mechanical
reliability, exact FPC/FFC positioning and durability.
sFeatures
1. Precise FFC/FPC positionining
Large angle of the actuator opening and built-in side guides in the
connector allow straight and exact insertion of the FPC / FFC.
2. Rotating actuator
Proven rotating actuator system allows easy ZIF connection,
confirming it with a definite tactile feel. The contact securely
holds the actuator in place, providing reliable normal force.
The unique contact configuration assures that the connector
will remain dimensionally stable over the device’s life.
3. Strong FFC / FPC retention force
Horizontal direction FFC / FPC retention force : Increased
200% (as compared with FH12 series)(30 pos.)
4. Accepts standard FPC/FFC thickness
0.3mm thick standard Flexible Printed Circuit (FPC) and
Flexible Flat cable (FFC) can be used.
5. Conductive traces on the PCB can run under
the connector
No exposed contacts on the bottom of the connector.
6. Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate
vacuum pick-up and placement.
Standard reel packaging contains 2,000 connectors.
7. Halogen-free ^*
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
8. Optional 500 piece reel packaging
Standard packaging is 2,000 pieces per reel; however, 500
piece reels are possible.
(Emboss reel external diameter is 330mm.)
FPC temporary hold protrusion
Support straight type FPC / FFC
2010.9
1