S12071_15 Datasheet, PDF (4/11 Pages) Hamamatsu Corporation – CCD area image sensor

CCD area image sensor
S12071
Electrical and optical characteristics (Ta=25 °C, unless otherwise noted, operating condition: Typ.)
Parameter
Symbol
Min.
Typ.
Max.
Saturation output voltage
Vsat
-
Fw × Sv
-
Full well capacity
Fw
280
350
-
CCD node sensitivity*⁸
Tap A
Tap B
4
5
6
Sv
4.5
5.5
6.5
Dark current*⁹
Td=25 °C
Td=0 °C
DS
-
100
1000
-
7
70
Readout noise*⁸ *¹⁰
Tap A
Tap B
Nr
-
9
18
-
50
100
Dynamic range*¹⁰ *¹¹
Tap A
Tap B
Photoresponse nonuniformity*¹²
15555
38888
-
DR
2800
7000
-
PRNU
-
±3
±10
Spectral response range
λ
-
165 to 1100
-
Anti-blooming
AB
Fw × 100
-
-
Point defect*^{13 White spots}
-
-
3
Black spots
-
-
10
Blemish
Cluster defect*¹⁴
-
-
-
3
Column defect*¹⁵
-
-
0
*8: Tap A: VODA=24 V, RLA=10 kΩ, Tap B: VODB=12 V, RLB=2.2 kΩ
*9: Dark current is reduced to half for every 5 to 7 °C decrease in temperature.
*10: Signal output frequency=100 kHz (Tap A), 2 MHz (Tap B)
*11: Dynamic range=Full well capacity/Readout noise
*12: Measured at one-half of the saturation output (full well capacity), using LED light (peak emission wavelength: 660 nm)
Unit
V
ke^-
μV/e^-
e^-/pixel/s
e^- rms
-
-
%
nm
-
-
-
-
-
Fixed pattern noise (peak to peak)
Photoresponse nonuniformity =
× 100 [%]
Signal
*13: White spots=Pixels whose dark current is higher than 1 ke^- after one-second integration at 0 °C
Black spots=Pixels whose sensitivity is lower than one-half of the average pixel output (measured with uniform light producing
one-half of the saturation charge)
*14: 2 to 9 contiguous defective pixels
*15: 10 or more contiguous defective pixels
Spectral response (without window)*¹⁶
120
110
100
90
80
70
60
50
40
30
20
10
0
200 300 400 500 600 700 800
(Typ. Ta=25 °C)
900 1000 1100
Wavelength (nm)
KMPDB0373EB
*16: Spectral response is decreased according to the spectral transmittance characteristics of window material.
4