S12071_15 Datasheet, PDF (2/11 Pages) Hamamatsu Corporation – CCD area image sensor

CCD area image sensor
S12071
Absolute maximum ratings (Ta=25 °C)
Parameter
Operating temperature*¹ *²
Storage temperature*²
Symbol
Min.
Typ.
Max.
Unit
Topr
-50
-
+50
°C
Tstg
-50
-
+70
°C
Output transistor drain voltage
VODA
-0.5
-
+30
V
VODB
-0.5
-
+25
Reset drain voltage
VRDA, VRDB
-0.5
-
+18
V
Output amplifier return voltage
Vret
-0.5
-
+18
V
Overflow drain voltage
VOFD
-0.5
-
+18
V
Dump drain voltage
VDD
-0.5
-
+18
V
Vertical input source voltage
VISV
-0.5
-
+18
V
Overflow gate voltage
VOFG
-15
-
+15
V
Dump gate voltage
VDG
-15
-
+15
V
Vertical input gate voltage
VIGV
-15
-
+15
V
Summing gate voltage
VSGA, VSGB
-15
-
+15
V
Output gate voltage
VOGA, VOGB
-15
-
+15
V
Reset gate voltage
VRGA, VRGB
-15
-
+15
V
Transfer gate voltage
VTG
-15
-
+15
V
Vertical shift register clock voltage
VP1V, VP2V
-15
-
+15
V
Horizontal shift register clock voltage
VP1H, VP2H
VP3H, VP4H
-15
-
+15
V
Maximum current of built-in TE-cooler*³
Imax
-
-
4.0
A
Maximum voltage of built-in TE-cooler
Vmax
-
-
3.4
V
*1: Chip temperature
*2: No condensation
*3: If the current greater than this value flows into the thermoelectric cooler, the heat absorption begins to decrease due to the Joule
heat. It should be noted that this value is not the damage threshold value. To protect the thermoelectric cooler and maintain stable
operation, the supply current should be less than 60% of this maximum current.
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product
within the absolute maximum ratings.
When there is a temperature difference between a product and the ambient in high humidity environment, dew condensation may
occur on the product surface. Dew condensation on the product may cause a deterioration of characteristics and reliability.
2