S12071_15 Datasheet, PDF (11/11 Pages) Hamamatsu Corporation – CCD area image sensor

CCD area image sensor
S12071
Precautions (electrostatic countermeasures)
· ^{Handle these sensors with bare hands or wearing cotton gloves. In addition, wear anti-static clothing or use a wrist band with an}
earth ring, in order to prevent electrostatic damage due to electrical charges from friction.
· Avoid directly placing these sensors on a work-desk or work-bench that may carry an electrostatic charge.
· Provide ground lines or ground connection with the work-floor, work-desk and work-bench to allow static electricity to discharge.
· Ground the tools used to handle these sensors, such as tweezers and soldering irons.
It is not always necessary to provide all the electrostatic measures stated above. Implement these measures according to the
amount of damage that occurs.
Element cooling/heating temperature incline rate
When cooling the CCD by an externally attached cooler, set the cooler operation so that the temperature gradient (rate of tempera-
ture change) for cooling or allowing the CCD to warm back is less than 5 K/minute.
Related information
www.hamamatsu.com/sp/ssd/doc_en.html
Precautions
· Notice
· Image sensor/Precautions
DEVELOPMENTAL Multichannel detector head C12081/C12081-01
Specifications
Parameter
Specification
Data rate
Tap A
Tap B
100 kHz
2 MHz
Frame rate (max.)
Tap A
Tap B
0.09 frames/s
1.42 frames/s
Dynamic range
Tap A
Tap B
Cooling temperature*²¹
30000
5000
-10 to +10 °C
Supply voltage
+5 V, ±15 V
A/D resolution
16-bit
Interface
Camra Link Base, USB 2.0
Dimensions
90 × 100 × 79.6 mm
Weight
1.2 kg
*21: Cooling temperature depends on the circulating water temperature
(C12081) and the ambient temperature (C12081-01).
Information described in this material is current as of December, 2014.
Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the
information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always
contact us for the delivery specification sheet to check the latest specifications.
The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that
one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use.
Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone]
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: [phone], Fax: [phone]
China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: [phone], Fax: [phone]
11
Cat. No. KMPD1138E03 Dec. 2014 DN