S8980_S10810_15 Datasheet, PDF (1/10 Pages) Hamamatsu Corporation – CCD area image sensors

CCD area image sensors
S8980
S10810-11
Front-illuminated FFT-CCDs for X-ray imaging
The S8980 is an FFT-CCD image sensor suitable for intra-oral X-ray imaging in dental diagnosis. The S8980 has 1.5 mega
(1500 × 1000) pixels, each of which is 20 × 20 μm in size. The FOP (fiber optic plate) used as an input window is as thin as 1.5
mm, making high resolution as well as highly resistant to X-ray irradiation. The scintillator coated on the FOP is optimized to
have high X-ray sensitivity and high resolution (20 Lp/mm).
The S10810-11 is an easy-to-use X-ray imaging module using the S8980, with added functions such as a cable assembly
and X-ray trigger circuit.
Features
X-ray monitoring photodiode incorporated
Compact size
High dynamic range: 12-bit
Long-term stability
Resolution: 20 Lp/mm
1500 (H) × 1000 (V) pixel format
Pixel size: 20 × 20 μm
Coupled with FOS for X-ray imaging
100% fill factor
Low dark signal
Low readout noise
MPP operation
AC/DC X-ray source adapted
Applications
Intra-oral X-ray imaging in dental diagnosis
General X-ray imaging
Non-destructive inspection
These products are components for incorporation into medi-
cal and industrial device.
Structure
Parameter
CCD structure
Fill factor
Cooling
Number of pixels
Number of active pixels
Pixel size
Active area
Vertical clock phase
Horizontal clock phase
Output circuit
Dimensions
Window
S8980
S10810-11
Full frame transfer
100%
Non-cooled
1508 (H) × 1002 (V)
1500 (H) × 1000 (V)
20 (H) × 20 (V) μm
30 (H) × 20 (V) mm
2 phases
2 phases
Emitter follower without load resistor
35.5 (H) × 23.2 (V) mm
41.0 (H) × 26.4 (V) mm
FOS (scintillator on 1.5 mm FOP)
www.hamamatsu.com
1