MB40D001 Datasheet, PDF (9/17 Pages) Fujitsu Component Limited. – D/A Converter for Digital Tuning

MB40D001
s ABSOLUTE MAXIMUM RATINGS
Parameter
Power supply voltage
Input voltage 1
Output voltage 1
Input voltage 2
Output voltage 2
Power consumption
Operating temperature
Storage temperature
Symbol
Conditions
VCCA
VCCD
VDD
Vin1
Vout1
Vin2
Vout2
PD
Ta
Tstg
Based on GND
(Ta = +25°C)
SI, CLK, CS,
SO, D0 to D3
D4 to D11
—
—
—
Rating
Min.
Max.
–0.3
+7.0
–0.3
+7.0
–0.3
VCCA*
–0.3 VCCD + 0.3
–0.3 VCCD + 0.3
–0.3 VCCA + 0.3
–0.3 VCCA + 0.3
—
250
–20
+85
–55
+150
Unit
V
V
V
V
V
V
V
mW
°C
°C
* : VCCA ≥ VDD
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Value
Symbol
Conditions
Unit
Min.
Typ.
Max.
Power supply voltage
VCCA
—
2.7
3.0
3.6
V
VCCD
—
2.7
—
3.6
V
VDD
VCCA ≥ VDD
2.0
—
VCCA
V
GND
—
—
0
—
V
Analog output current
Oscillation limit output
capacity
Operation temperature
IAL
Source current
—
IAH
Sink current
—
—
1.0
mA
—
0.4
mA
COL
—
—
—
1.0
µF
Ta
—
–20
—
+85
°C
Note: Data in registers is retained in standby mode (digital supply: VccD voltage, analog supply: GND).
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
9