MB85R1002A Datasheet, PDF (5/16 Pages) Fujitsu Component Limited. – Memory FRAM CMOS 1 M Bit (64 K x 16)

MB85R1002A
■ ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Symbol
Unit
Min
Max
Power Supply Voltage*
VCC
−0.5
+4.0
V
Input Pin Voltage*
VIN
−0.5
VCC + 0.5 ( ≤ 4.0)
V
Output Pin Voltage*
VOUT
−0.5
VCC + 0.5 ( ≤ 4.0)
V
Operating Temperature
TA
−40
+85
o_C
Storage Temperature
Tstg
−40
+125
o_C
* : All voltages are referenced to VSS (ground 0 V).
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■ RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Min
Value
Typ
Unit
Max
Power Supply Voltage*
High Level Input Voltage*
Low Level Input Voltage*
Operating Temperature
VCC
3.0
3.3
3.6
V
VIH
VCC × 0.8
⎯
VCC + 0.5
( ≤ 4.0)
V
VIL
−0.5
⎯
+0.6
V
TA
− 40
⎯
+85
o_C
* : All voltages are referenced to VSS (ground 0 V).
WARNING: The recommended operating conditions are required in order to ensure the normal operation of
the semiconductor device. All of the device's electrical characteristics are warranted when the
device is operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges.
Operation outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented
on the data sheet. Users considering application outside the listed conditions are advised to contact
their representatives beforehand.
DS501-00004-0v01-E
5