MB15E07SR Datasheet, PDF (5/25 Pages) Fujitsu Component Limited. – Single Serial Input PLL Frequency Synthesizer On-chip 2.5 GHz Prescaler

MB15E07SR
■ ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Condition
Rating
Min
Max
Unit
Remark
VCC
Power supply voltage
VP
–
–0.5
5.5
V
–
VCC
6.0
V
Input voltage
VI
–
–0.5
VCC + 0.5
V
Output voltage
Storage temperature
VO
Except Do
GND
VCC
V
VO
Do
GND
VP
V
Tstg
–
–55
+125
°C
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■ RECOMMENDED OPERATING CONDITIONS
Parameter
Value
Symbol
Unit
Min
Typ
Max
Remark
Power supply voltage
VCC
2.7
3.75
5.0
V
VP
VCC
–
5.5
V
Input voltage
Operating temperature
VI
GND
–
Ta
–40
–
VCC
V
+85
°C
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
5