MB39A106 Datasheet, PDF (42/46 Pages) Fujitsu Component Limited. – 2-Channel DC/DC Converter IC with Overcurrent Protection Symmetrical-Phase Type

MB39A106
■ NOTES ON USE
• Take account of common impedance when designing the earth line on a printed wiring board.
• Take measures against static electricity.
- For semiconductors, use antistatic or conductive containers.
- When storing or carrying a printed circuit board after chip mounting, put it in a conductive bag or container.
- The work table, tools, and measuring instruments must be grounded.
- The worker must put on a grounding device containing 250 kΩ to 1 MΩ resistors in series.
• Do not apply a negative voltage.
- Applying a negative voltage of −0.3 V or less to an LSI may generate a parasitic transistor, resulting in
malfunction.
■ PRECAUTIONS ON HANDLING THIS PRODUCT
This product has obtained US patents for patent numbers of 6,147,477.
■ ORDERING INFORMATION
Part number
MB39A106PFT-❏❏❏E1
Package
30-pin plastic TSSOP
(FPT-30P-M04)
Remarks
Lead Free version
■ EV BOARD ORDERING INFORMATION
EV board part No.
MB39A106EVB
EV board version No.
Board Rev. 2.0
Remarks
TSSOP-30P
■ RoHS COMPLIANCE INFORMATION OF LEAD (Pb) FREE VERSION
The LSI products of Fujitsu with “E1” are compliant with RoHS Directive, and has observed the standard of lead,
cadmium, mercury, Hexavalent chromium, polybrominated biphenyls (PBB) , and polybrominated diphenyl
ethers (PBDE) .
The product that conforms to this standard is added “E1” at the end of the part number.
■ MARKING FORMAT (LEAD FREE VERSION)
MB 3 9 A106
XXXX XXX
E1
Lead Free version
INDEX
42