MB81EDS256445 Datasheet, PDF (29/52 Pages) Fujitsu Component Limited. – MEMORY Consumer FCRAM CMOS 256M Bit (4 bank x 1M word x 64 bit) Consumer Applications Specific Memory for SiP

MB81EDS256445
(Continued)
Parameter
Symbol
Condition
Self Refresh Current
CKE = VIL, CS = VIL,
IDD6 address and control inputs are STABLE;
data bus inputs are STABLE
Value
Unit
Min.
Max.
⎯
4
mA
Deep Power Down
Current
IDD8
address and control inputs are STABLE;
data bus inputs are STABLE
⎯
20
μA
Notes: • All voltages are referenced to VSS.
• After power on, initialization following power-up timing is required. DC characteristics are guaranteed
after the initialization.
• IDD depends on the output termination or load condition, clock cycle rate, signal clocking rate.
The specified values are obtained with the output open condition.
DS05-11456-1E
29