MB86613 Datasheet, PDF (2/36 Pages) Fujitsu Component Limited. – IEEE 1394 Open HCI Controller

MB86613
s FEATURES
1. 1394 serial bus controller Unit
• Compliant with IEEE 1394-1995 Standard
• PHYsical and LINK layer modules integrated on a single chip
• Three internal ports
• Transfer rates of S100, S200, and S400 supported
• On-chip PLL for generating 400-MHz (PHY) and 50-MHz (LINK) CLK signals
• Built-in cycle master function
• Bus management CSR (control and status register)
• Six-conductor cable supported
• Internal transceiver and comparator
• Internal comparator for cable power detection
2. Context program controller unit
• Compliant with Open HCI Standard (Draft 1.00)
• Thirteen context program controllers integrated:
Asynchronous Transmit DMA …2ch •Asynchronous response
Isochronous Transmit DMA
Receive DMA
•Asynchronous request
…4ch
…7ch •Asynchronous response
•Asynchronous request
•Isochronous
•SelfID
• Internal 6-KB FIFO buffers
Asynchronous Transmit FIFO
…1.5 Kbyte
isochronous Transmit FIFO
…1.5 Kbyte
Asynchronous/Isochronous Receive FIFO …3.0 Kbyte
…1ch
…1ch
…1ch
…1ch
…4ch
…1ch
3. PCI bus controller unit
• Compliant with PCI Standard (Revision 2.2)
• On-chip 32-bit DMA controller
• Built-in power management function (Compliant with PCI bus power management standard version 1.0)
• Built-in alignment function
• Built-in byte swap function
• Operating frequency of up to 33 MHz
• Internal parallel ROM interface
• Internal serial ROM interface
• Internal universal (5/3.3 V shared) PCI buffer
4. Physical specifications
• Package: LQFP144 (FPT-144P-M08), FBGA176 (BGA-176P-M02)
• Power-supply voltage: Dual system for 5 V (± 5%) and 3.3 V (± 5%)
5. Reference standards
• IEEE Standard for a High Performance 1394-1995
• 1394 Open Host Controller Interface Specification (Release 1.00)
• PCI Specification (Revision 2.2)
• PCI Bus Power Management Interface Specification (Version 1.0)
2