MB86613 Datasheet, PDF (16/36 Pages) Fujitsu Component Limited. – IEEE 1394 Open HCI Controller

MB86613
s RECOMMENDED OPERATING CONDITIONS
Parameter
at 5 V^∗2
Power supply voltage^∗1
at 3 V^∗3
TPA/B arbitration
TPA/B S100^∗4
Differential input voltage
TPA/B S200^∗4
TPA/B S400^∗4
TPBias input voltage
TPA/B S100^∗4
TPA/B S200^∗4
TPA/B S400^∗4
Receiving input jitter
TPA/B S100^∗4
TPA/B S200^∗4
TPA/B S400^∗4
TPA/B S100^∗4
Receiving input skew^∗6 TPA/B S200^∗4
TPA/B S400^∗4
Output current
TPBIAS pin
MD pin
Operating ambient temperature
Symbol
VDD5
VDD3
VID
VCM


IO
Ta
Min.
4.75
3.0
168
142
132
118
1.165
0.935
0.523






−2
−4
0
Value
Max.
5.25
3.6
265
260
260
260
2.515^∗5
2.515^∗5
2.515^∗5
±1.08
±0.5
±0.315
±0.8
±0.55
±0.5
+2
+4
70
*1 : Voltage values are based on Vss =0V.
*2 : The 5 V power supply is the voltage applied at the VDD5/3 and VDD5 power supply pins.
*3 : The 3 V power supply is the voltage applied at the DVDD3 and AVDD3 power supply pins.
*4 : During speed signaling
*5 : With cable power feed, the value is 2.015 (V).
*6 : Skew between TPA pin and TPB pin.
Unit
V
mV
p-p
diff
V
ns
ns
mA
°C
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
16