UMFT240XE Datasheet, PDF (1/18 Pages) Future Technology Devices International Ltd. – UMFT240XE USB to 8-bit 245 FIFO Development Module

UMFT240XE
Version 1.0
Document Reference No.: FT_000653 Clearance No.: FTDI# 295
Future Technology
Devices
International Ltd
Datasheet
UMFT240XE USB to 8-bit
245 FIFO Development
Module
UMFT240XE is a USB to 8-bit 245 FIFO DIP module with a 0.6” row pitch.
1 Introduction
1.1 Features
The UMFT240XE is a development module
for FTDI‟s FT240XQ, one of the devices
from FTDI‟s range of USB to serial data
interface integrated circuit devices.
FT240X is a USB to 245 FIFO interface
with a battery charging feature, which
can allow batteries to be charged with a
higher current from a dedicated charger
port (without the FT240X being
enumerated). In addition, asynchronous
and synchronous bit bang interface
modes are available. The internally
generated clock (6MHz, 12MHz, 24MHz
and 48MHz) can be brought out of the on
one of the CBUS pin to be used to drive a
microprocessor or external logic.
The UMFT240XE is a module which is
designed to plug into a standard 0.6”
wide 24 pin DIP socket. All components
used, including the FT240XQ are Pb-free
(RoHS compliant).
The UMFT240XE is fitted with a FT240XQ, all
the features of the FT240X can be utilized
with the UMFT240XE. For a full list of the
FT240X‟s features please see the FT240X
datasheet which can be found by clicking
here.
In addition to the features listed in the
FT240X datasheet, the UMFT240XE has the
following features:
 Small PCB assembly module designed to
fit a standard 15.24mm (0.6”) wide 24
pin DIP socket. Pins are on a 2.54mm
(0.1”) pitch.
 On board USB „mini-B‟ socket allows
module to be connected to a PC via a
standard A to mini-B USB cable.
 Functionally configurable using jumpers.
The default jumper setup enables the
module to function without peripheral
wires or application board. Other
configurations enable external power
supply options and variation of logic
reference levels.
Use of FTDI devices in life support and/or safety applications is entirely at the user‟s risk, and the user agrees
to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting
from such use.