33810_10 Datasheet, PDF (9/35 Pages) Freescale Semiconductor, Inc – Automotive Engine Control IC

ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 3. Static Electrical Characteristics
Characteristics noted under conditions of 3.0 V ≤ VDD ≤ 5.5 V, 6.0 V ≤ VPWR ≤ 32 V, -40°C ≤ TC ≤ 125°C, and calibrated
timers, unless otherwise noted. Where typical values reflect the parameter’s approx. average value with VPWR = 13 V, TA =
25°C.
Characteristic
Symbol
Min
Typ
Max
Unit
DIGITAL INTERFACE (CONTINUED)
Input Logic Pull-down Current
0.8 to 5.0 V (SI)
Input Logic Pull-up Current on OUT_EN
OUT_EN = 0.0 V, V_DD = 5.0 V
OUT_EN Leakage Current to V_DD
OUT_EN = 5.0 V, V_DD = 0 V
SCLK Pull-down Current
V_SCLK = V_DD
Tri-state SO Output
0 to 5.0 V
CS Input Current
CS = V_DD
CS Pull-up Current
CS = 0 V
CS Leakage Current to V_DD
CS = 5.0 V, V_DD = 0 V
SO Input Capacitance in Tri-state Mode
SO High State Output Voltage
I_SO-HIGH = -1.0 mA
SO Low State Output Voltage
I_SO-LOW = 1.0 mA
NOMI, MAXI in V10 Mode Pull-down Current
NOMI, MAXI = 0.8 V_, V_DD = 5.0 V
SPKDUR Output Voltage
I_SPKDUR = 1.0 mA
Output Pull-up Current for SPKDUR
NOMI, MAXI High State Output Voltage
I_NOMI-HIGH = -1.0 mA
I_MAXI-HIGH = -1.0 mA
NOMI, MAXI Low State Output Voltage
I_NOMI-LOW = 250 µA
I_MAXI-LOW = 250 µA
I_{SI_PD}
5.0
I_{OUT_EN_PU}
-30
μA
15
25
μA
-50
-100
I_{OUT_EN(LKG)}
–
μA
–
50
I _SCLK
μA
5
15
25
I _TRISO
I_CS
-10
–
-50
–
μA
10
μA
50
I_{CS_PU}
I_CS(LKG)
μA
-30
-50
-100
μA
–
–
50
C_SO
–
20
V_{SO_HIGH}
V_DD - 0.4
–
V_{SO_LOW}
–
–
–
pF
V
–
V
0.4
I_PD
μA
30
70
100
V_{SPKDUR_LO}
–
V
–
0.4
I_{SPKDUR_PV}
30
50
V_{I_HIGH}
V_DD - 0.4
–
100
μA
V
–
V_{I_LOW}
V
–
–
0.4
Analog Integrated Circuit Device Data
Freescale Semiconductor
33810
9