MC33580 Datasheet, PDF (6/38 Pages) Freescale Semiconductor, Inc – Quad High-Side Switch (Quad 15 mΩ)

ELECTRICAL CHARACTERISTICS
STATIC ELECTICAL CHARACTERISTICS
STATIC ELECTICAL CHARACTERISTICS
Table 3. Static Electrical Characteristics
Characteristics noted under conditions 6.0 V ≤ V_PWR ≤ 27 V, 4.5 V ≤ V_DD ≤ 5.5 V, - 40°C ≤ T_A ≤ 125°C, GND = 0 V unless
otherwise noted. Typical values noted reflect the approximate parameter means at T_A = 25°C under nominal conditions unless
otherwise noted.
Characteristic
Symbol
Min
Typ
Max
Unit
POWER INPUT (VPWR, VDD)
Battery Supply Voltage Range
Fully Operational
V_PWR
V
6.0
–
27
V_PWR Operating Supply Current
Outputs ON, HS[0 : 3] open
I_PWR(ON)
–
mA
–
20
V_PWR Supply Current
I_PWR(SBY)
Outputs OFF, Open Load Detection Disabled, WAKE > 0.7 V_DD,
RST = V_{LOGIC HIGH}
–
mA
–
5.0
Sleep State Supply Current (V_PWR = 14 V, RST < 0.5 V, WAKE < 0.5 V) I_PWR(SLEEP)
T_A = 25°C
–
T_A = 85°C
–
µA
1.0
10
–
50
V_DD Supply Voltage
V_DD Supply Current
No SPI Communication
3.0 MHz SPI Communication⁽⁸⁾
V_DD(ON)
4.5
5.0
5.5
V
I_DD(ON)
–
mA
–
1.0
–
–
5.0
V_DD Sleep State Current
I_DDSLEEP
–
–
5.0
µA
Overvoltage Shutdown Threshold
V_OV
28
32
36
V
Overvoltage Shutdown Hysteresis
Undervoltage Shutdown Threshold ⁽⁷⁾
Undervoltage Hysteresis ⁽⁹⁾
V_OVHYS
0.2
0.8
1.5
V
V_UV
4.75
5.25
5.75
V
V_UVHYS
–
0.25
–
V
Undervoltage Power-ON Reset
V_UVPOR
–
–
4.75
V
Notes
7. The undervoltage fault condition is reported to SPI register as long as the external VDD supply is within specification and the VRWR
voltage level does not go below the undervoltage Power-ON Reset threshold.
8. Not guaranteed in production.
9. This applies when the undervoltage fault is not latched (IN[0:3] = 0).
33580
6
Analog Integrated Circuit Device Data
Freescale Semiconductor