English
Language : 

MC33580 Datasheet, PDF (10/38 Pages) Freescale Semiconductor, Inc – Quad High-Side Switch (Quad 15 mΩ)
ELECTRICAL CHARACTERISTICS
DYNAMIC ELECTRICAL CHARACTERISTICS
DYNAMIC ELECTRICAL CHARACTERISTICS
Table 4. Dynamic Electrical Characteristics
Characteristics noted under conditions 6.0 V ≤ VPWR ≤ 27 V, 4.5 V ≤ VDD ≤ 5.5 V, - 40°C ≤ TA ≤ 125°C, GND = 0 V unless
otherwise noted. Typical values noted reflect the approximate parameter means at TA = 25°C under nominal conditions unless
otherwise noted.
Characteristic
Symbol
Min
Typ
Max
Unit
POWER OUTPUT TIMING (HS0, HS1, HS2, HS3)
Output Rising Slow Slew Rate A (DICR D3 = 0) (19)
9.0 V < VPWR < 16 V
Output Rising Slow Slew Rate B (DICR D3 = 0) (20)
9.0 V < VPWR < 16 V
Output Rising Fast Slew Rate A (DICR D3 = 1) (19)
9.0 V < VPWR < 16 V
Output Rising Fast Slew Rate B (DICR D3 = 1) (20)
9.0 V < VPWR < 16 V
Output Falling Slow Slew Rate A (DICR D3 = 0) (19)
9.0 V < VPWR < 16 V
Output Falling Slow Slew Rate B (DICR D3 = 0) (20)
9.0 V < VPWR < 16 V
Output Falling Fast Slew Rate A (DICR D3 = 1) (19)
9.0 V < VPWR < 16 V
Output Falling Fast Slew Rate B (DICR D3 = 1) (20)
9.0 V < VPWR < 16 V
SRRA_SLOW
V/µs
0.2
0.6
1.5
SRRB_SLOW
V/µs
0.025
0.1
0.225
SRRA_FAST
0.06
0.2
V/µs
4.0
SRRB_FAST
0.025
0.3
V/µs
1.1
SRFA_SLOW
V/µs
0.2
0.6
1.5
SRFB_SLOW
V/µs
0.025
0.1
0.225
SRFA_FAST
V/µs
1.2
3.5
5.0
SRFB_FAST
0.025
0.7
V/µs
1.1
Direct Input Switching Frequency (DICR D3 = 0)
fPWM
-
300
-
Hz
Notes
19. Rise and Fall Slew Rates A measured across a 5.0 Ω resistive load at high-side output = 0.5 V to VPWR-3.5 V (see Figure 4, page 13).
These parameters are guaranteed by process monitoring.
20. Rise and Fall Slew Rates B measured across a 5.0 Ω resistive load at high-side output = 0.5 V to VPWR-3.5 V (see Figure 4). These
parameters are guaranteed by process monitoring.
33580
10
Analog Integrated Circuit Device Data
Freescale Semiconductor