MC9S08QE128_08 Datasheet, PDF (49/50 Pages) Freescale Semiconductor, Inc – 8-Bit HCS08 Central Processor Unit (CPU)

Product Documentation
6 Product Documentation
Find the most current versions of all documents at: http://www.freescale.com
Reference Manual
(MC9S08QE128RM)
Contains extensive product information including modes of operation, memory,
resets and interrupts, register definition, port pins, CPU, and all module
information.
7 Revision History
To provide the most up-to-date information, the revision of our documents on the World Wide Web are the most current. Your
printed copy may be an earlier revision. To verify you have the latest information available, refer to:
http://www.freescale.com
The following revision history table summarizes changes contained in this document.
Table 22. Revision History
Revision
4
5
6
7
Date
9 Nov 2007
28 May 2008
24 Jun 2008
2 Oct 2008
Description of Changes
Replaced 44 QFP package with 44 LQFP package.
Changed ACMP electricals, V_AIO specification’s test category from P to C.
Updated the tables Thermal Characteristics, DC Characteristics, Supply Current
Characteristics, XOSC and ICS Specifications (Temperature Range = –40 to 85°C
Ambient), ICS Frequency Specifications (Temperature Range = –40 to 85°C Ambient),
Control Timing, and Analog Comparator Electrical Specifications, 12-bit ADC
Characteristics (VREFH = VDDAD, VREFL = VSSAD)
Updated the figures Typical Run IDD for FBE and FEI, IDD vs. VDD (ACMP and ADC off,
All Other Modules Enabled), Deviation of DCO Output from Trimmed Frequency (50.33
MHz, 3.0 V), and Deviation of DCO Output from Trimmed Frequency (50.33 MHz, 25°C)
Updated the table Thermal Characteristics
Updated the row corresponding to Num 18 in the table DC Characteristics
Updated the tables MC9S08QE128 Series Features by MCU and Package, DC
Characteristics, Supply Current Characteristics, Thermal Characteristics, Control
Timing, and Ordering Information
Updated the figures Typical Run IDD for FBE and FEI, IDD vs. VDD
(ADC off, All Other Modules Enabled), Deviation of DCO Output Across Temperature at
VDD = 3.0 V, and Deviation of DCO Output Across VDD at 25×C
Updated the Stop2 and Stop3 mode supply current in the Supply Current Characteristics table.
Replaced the stop mode adders section from the Supply Current Characteristics with its own
Stop Mode Adders table with new specifications.
MC9S08QE128 Series Data Sheet, Rev. 7
Freescale Semiconductor
49