MC9S08SH8CTG Datasheet, PDF (303/341 Pages) Freescale Semiconductor, Inc – HCS08 Microcontrollers

Appendix A Electrical Characteristics
1 _{Typical values are based on characterization data at 25°C. See Figure A-5 through Figure A-7 for typical curves}
across voltage/temperature.
2 _{Max values in this column apply for the full operating temperature range of the device unless otherwise noted.}
3 _{All modules except ADC active, ICS configured for FBE, and does not include any dc loads on port pins.}
4 _{All modules except ADC active, ICS configured for FEI, and does not include any dc loads on port pins.}
5 _{Stop currents are tested in production for 25°C on all parts. Tests at other temperatures depend upon the part}
number suffix and maturity of the product. Freescale may eliminate a test insertion at a particular temperature
from the production test flow once sufficient data has been collected and is approved.
6 _{Most customers are expected to find that auto-wakeup from stop2 or stop3 can be used instead of the higher}
current wait mode.
7 _{Values given under the following conditions: low range operation (RANGE = 0) with a 32.768kHz crystal and low}
power mode (HGO = 0).
10
FEI
FBELP
8
6
4
2
0
01 2 4
8
f_bus (MHz)
16
20
Figure A-5. Typical Run I_DD vs. Bus Frequency (V_DD = 5V)
MC9S08SH8 MCU Series Data Sheet, Rev. 3
Freescale Semiconductor
299