S9S08SC4E0MTG Datasheet, PDF (14/31 Pages) Freescale Semiconductor, Inc – MC9S08SC4 8-Bit Microcontroller Data Sheet

Chapter 3 Electrical Characteristics
Table 3-7. Supply Current Characteristics
Num C
Parameter
Symbol
V_DD
(V)
Typ¹
Max²
Unit
1 C Run supply current³ measured at
(CPU clock = 4 MHz, f_Bus = 2 MHz)
RI_DD
5
1.9
2.4
mA
2
P Run supply current³ measured at
(CPU clock = 16 MHz, f_Bus = 8 MHz)
RI_DD
5
4.6
5.6
mA
3
C Run supply current⁴ measured at
(CPU clock = 32 MHz, f_Bus = 16 MHz)
RI_DD
5
7.8
8.9
mA
C
–40 °C (C & M suffix)
0.71
—
P Stop3 mode
25 °C (All parts)
0.93
—
4 C⁵ supply current
85 °C (C suffix only)
S3I
5
4
DD
C⁵
105 °C (V suffix only)
9
11
μA
30
P⁵
125 °C (M suffix only)
28
60
5C
–40 °C (C & M suffix)
0.70
—
P Stop2 mode
25 °C (All parts)
0.89
—
C⁵ supply current
85 °C (C suffix only)
S2I_DD
5
3
C⁵
105 °C (V suffix only)
6
8
μA
22
P⁵
125 °C (M suffix only)
17
41
6 C LVD adder to stop3 (LVDE = LVDSE = 1)
S3I_DDLVD
5
110
165
μA
7
C Adder to stop3 for oscillator enabled⁶
(EREFSTEN =1)
S3I
5
5
DDOSC
8
μA
1 _{Typical values are based on characterization data at 25 °C. See Figure 3-5 through Figure 3-7 for typical curves}
across voltage/temperature.
2 _{Max values in this column apply for the full operating temperature range of the device unless otherwise noted.}
3 _{All modules except ADC active, ICS configured for FBE, and does not include any dc loads on port pins.}
4 _{All modules except ADC active, ICS configured for FEI, and does not include any dc loads on port pins.}
5 _{Stop currents are tested in production for 25 °C on all parts. Tests at other temperatures depend upon the part}
number suffix and maturity of the product. Freescale may eliminate a test insertion at a particular temperature
from the production test flow once sufficient data has been collected and is approved.
6 _{Values given under the following conditions: low range operation (RANGE = 0) with a 32.768 kHz crystal and low}
power mode (HGO = 0).
MC9S08SC4 MCU Series Data Sheet, Rev. 4
14
Freescale Semiconductor