K30P81M100SF2_11 Datasheet, PDF (11/62 Pages) Freescale Semiconductor, Inc – Up to 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz

General
1. All functional non-supply pins are internally clamped to V_SS, and induce an injection current when V_IN is less than V_SS. The
I_IC maximum operating requirement should not be exceeded. If this requirement cannot be met, the input must be current
limited to the value specified.
5.1.2 LVD and POR operating requirements
Table 2. V_DD supply LVD and POR operating requirements
Symbol Description
Min.
Typ.
Max.
Unit
V_POR
V_LVDH
Falling VDD POR detect voltage
Falling low-voltage detect threshold — high
range (LVDV=01)
TBD
1.1
TBD
V
TBD
2.56
TBD
V
Low-voltage warning thresholds — high range
V_LVW1H
V_LVW2H
V_LVW3H
V_LVW4H
• Level 1 falling (LVWV=00)
• Level 2 falling (LVWV=01)
• Level 3 falling (LVWV=10)
• Level 4 falling (LVWV=11)
TBD
2.70
TBD
V
TBD
2.80
TBD
V
TBD
2.90
TBD
V
TBD
3.00
TBD
V
V_HYSH Low-voltage inhibit reset/recover hysteresis —
60
mV
high range
V_LVDL Falling low-voltage detect threshold — low range TBD
1.60
TBD
V
(LVDV=00)
Low-voltage warning thresholds — low range
V_LVW1L
V_LVW2L
V_LVW3L
V_LVW4L
• Level 1 falling (LVWV=00)
• Level 2 falling (LVWV=01)
• Level 3 falling (LVWV=10)
• Level 4 falling (LVWV=11)
TBD
1.80
TBD
V
TBD
1.90
TBD
V
TBD
2.00
TBD
V
TBD
2.10
TBD
V
V_HYSL Low-voltage inhibit reset/recover hysteresis —
40
mV
low range
V_BG Bandgap voltage reference
t_LPO Internal low power oscillator period
factory trimmed
TBD
1.00
TBD
V
TBD
1000
TBD
μs
1. Rising thresholds are falling threshold + hysteresis voltage
Table 3. VBAT power operating requirements
Symbol Description
V_{POR_VBAT} Falling VBAT supply POR detect voltage
Min.
Typ.
Max.
Unit
TBD
1.1
TBD
V
Notes
1
1
Notes
K30 Sub-Family Data Sheet Data Sheet, Rev. 4, 3/2011.
Freescale Semiconductor, Inc.
Preliminary
11