FNA21012A Datasheet, PDF (9/15 Pages) Fairchild Semiconductor – 1200 V Motion SPMR 2 Series

Recommended Operating Conditions
Symbol
Parameter
Conditions
Min.
V_PN Supply Voltage
V_CC Control Supply Voltage
V_BS High-Side Bias Voltage
dV_CC / dt, Control Supply Variation
dV_BS / dt
t_dead
Blanking Time for
Preventing Arm - Short
Applied between P - N_U, N_V, N_W
Applied between V_{CC(UH, VH, WH)} - COM_(H), V_CC(L) -
COM_(L)
Applied between V_B(U) - V_S(U), V_B(V) - V_S(V), V_B(W) -
V_S(W)
For Each Input Signal
300
13.5
13.0
-1
2.0
f_PWM PWM Input Signal
-40°C £ T_C £ 125°C, -40°C £ T_J £ 150°C
-
V_SEN Voltage for Current
Applied between N_U, N_V, N_W - COM_{(H, L)}
-5
Sensing
(Including Surge Voltage)
PW_IN(ON) Minimun Input Pulse
PW_IN(OFF) ^Width
I_C £ 20 A, Wiring Inductance between N_{U, V, W} and 1.5
DC Link N < 10nH (Note 10)
1.5
T_J
Junction Temperature
-40
Note:
10. This product might not make output response if input pulse width is less than the recommanded value.
Value
Typ. Max.
600 800
15.0 16.5
15.0 18.5
-
1
-
-
-
20
5
-
-
-
-
-
150
Unit
V
V
V
V / ms
ms
kHz
V
ms
°C
Figure 8. Allowable Maximum Output Current
Note:
11. This allowable output current value is the reference data for the safe operation of this product. This may be different from the actual application and operating condition.
©2013 Fairchild Semiconductor Corporation
9
FNA21012A Rev. C0
www.fairchildsemi.com