FR014H5JZ Datasheet, PDF (1/12 Pages) Fairchild Semiconductor – High-Side Reverse Bias / Reverse Polarity Protector With Integrated Over Voltage Transient Suppression

July 2012
FR014H5JZ (14mΩ, -30V)
High-Side Reverse Bias / Reverse Polarity Protector
With Integrated Over Voltage Transient Suppression
Features
 Up to -30V Reverse-Bias Protection
 Nano Seconds of Reverse-Bias Blocking
Response Time
 +32V 24-Hour “Withstand” Rating
 14mΩ Typical Series Resistance at 5V
 Integrated TVS Over Voltage Suppression
 MLP 3.3x3.3 Package Size
 RoHs Compliant
 USB Tested and Compatible
Applications
 USB 1.0, 2.0 and 3.0 Devices
 USB Charging
 Mobile Devices
 Mobile Medical
 POS Systems
 Toys
 Any DC Barrel Jack Powered Device
 Any DC Devices subject to Negative Hot Plug or
Inductive Transients
 Automotive Peripherals
Description
Reverse bias is an increasingly common fault event that
may be generated by user error, improperly installed
batteries, automotive environments, erroneous
connections to third-party chargers, negative “hot plug”
transients, inductive transients, and readily available
negatively biased rouge USB chargers.
Fairchild circuit protection is proud to offer a new type of
reverse bias protection devices. The FR devices are low
resistance, series switches that, in the event of a
reverse bias condition, shut off power and block the
negative voltage to help protect downstream circuits.
The FR devices are optimized for the application to offer
best in class reverse bias protection and voltage
capabilities while minimizing size, series voltage drop,
and normal operating power consumption.
In the event of a reverse bias application, FR014H5JZ
devices effectively provide a full voltage block and can
easily protect -0.3V rated silicon.
From a power perspective, in normal bias, a 14mΩ FR
device in a 1.5A application will generate only 21mV of
voltage drop or 32mW of power loss. In reverse bias,
FR devices dissipate less then 20µW in a 16V reverse
bias event. This type of performance is not possible with
a diode solution.
Benefits extend beyond the device. Due to low power
dissipation, not only is the device small, but heat sinking
requirements and cost can be minimized as well.
Ordering Information
Part Number
Top Mark
FR014H5JZ
14H
Package
8-Lead, Molded Leadless Package (MLP),
Dual, 3.3mm Square
Packing Method
3000 on Tape & Reel;
13-inch Reel, 12mm Tape
© 2012 Fairchild Semiconductor Corporation
FR014H5JZ • Rev. C1
www.fairchildsemi.com