FMS7951 Datasheet, PDF (1/8 Pages) Fairchild Semiconductor – Zero Delay Clock Multiplier

FMS7951
Zero Delay Clock Multiplier
www.fairchildsemi.com
Features
• Low Voltage CMOS or PECL reference input
• Up to 175 MHz of output frequency
• Nine configurable outputs
• Output enable pin
• 250 pS of output to output skew
• 300 pS of Cycle to Cycle Jitter
• VDD Range of 3.3V ±0.2V
• Commercial temperature range
• Available in 32 pin TQFP
Description
FMS7951 is a high speed, zero delay, low skew clock driver. It
uses phase locked loop technology to generate frequencies up
to 175 MHz.
It has four banks of configurable outputs. By externally con-
necting one of the outputs to FBIN, the internal PLL will
lock in both phase and frequency to the incoming clock. Any
changes to the input clock will be tracked by the outputs.
Depending on the selected output for feedback connection,
the output frequencies will be as 1X, 2X or 4X of the input.
REF_SEL allows selection between PECL input or TCLK a
CMOS clock driven input. Connecting PLL_EN LOW and
REF_SEL HIGH will by pass the Phase locked loop. In this
mode, FMS7951 will be in clock buffer mode where any
clock applied to TCLK will be divided down to the four out-
put banks. This is ideal for system diagnostic test. When
PLL_EN is HIGH, the PLL is enabled, and any clock applied
to TCLK will be locked in both phase and frequency to
FBIN. PECL_CLK is activated when REF_SEL is high.
FMS7951 operates at 3.3 Volts and is available in 32 pin LQFP.
Block Diagram
TCLK
PECL_CLK
PECL_CLK
FBIN
REF_SEL
PLL_EN
MUX
PLL
MUX
DIV_SEL A
DIV_SEL B
DIV_SEL C
DIV_SEL D
Control
Logic
OE
QA
QB
QC0
QC1
QD0
QD1
QD2
QD3
QD4
REV. 1.0.0 1/9/01