English
Language : 

MC3433 Datasheet, PDF (9/45 Pages) List of Unclassifed Manufacturers – Axis Accelerometer
MC3433 3-Axis Accelerometer
Preliminary Datasheet
3.4 TYPICAL APPLICATION CIRCUITS
To Fast-Mode I2C
circuitry1
Rp Rp
Place cap close
to VDD and 0.1µF
GND on PCB
Rp
(optional) To MCU
interrupt input2
12 11
SCL NC
1 NC
2 SDA
3 VDD/VDDIO
4 NC
NC 10
GND 9
NC 8
NC 7
INTN VPP
56
NOTE1: Rp are typically 4.7kΩ pullup resistors to VDD/VDDIO, per I2C specification. When
pin VDD/VDDIO is powered down, SDA and SCL will be driven low by internal ESD diodes.
NOTE2: Attach typical 4.7kΩ pullup resistor if INTN is defined as open-drain.
Figure 5. Typical Application Circuit For 3DOF Solution
In typical applications, the interface power supply may contain significant noise from external
sources and other circuits which should be kept away from the sensor. Therefore, for some
applications a lower-noise power supply might be desirable to power the VDD/VDDIO pin.
mCube Proprietary.
APS-048-0025v1.7
© 2014 mCube Inc. All rights reserved.
9 / 45