MC3433 Datasheet, PDF (21/45 Pages) List of Unclassifed Manufacturers – Axis Accelerometer

MC3433 3-Axis Accelerometer
Preliminary Datasheet
7 OPERATIONAL STATE FLOW
Figure 10. Operational State Flow shows the operational state flow for the device. The device
defaults to STANDBY following power-on.
WAKE
OPCON=00
OPCON=01
STANDBY
Figure 10. Operational State Flow
The operational state may be forced to a specific state by writing into the OPCON bits, as
shown below. Two bits are specified in order to promote software compatibility with other
mCube devices. The operational state will stay in the mode specified until changed:
Action
Force Wake State
Setting
OPCON[1:0] = 01
Force Standby State OPCON[1:0] = 00
Table 10. Forcing Operational States
Effect
 Switch to WAKE state and stay there
 Continuous sampling
 Switch to STANDBY state and stay
there
 Disable sensor and event sampling
mCube Proprietary.
APS-048-0025v1.7
© 2014 mCube Inc. All rights reserved.
21 / 45