9202-S Datasheet, PDF (9/122 Pages) List of Unclassifed Manufacturers – E-Z-Hook is dedicated to providing quality parts, delivered on-time at reasonable prices

E-Z MICRO-HOOK: XM
Part Number
XM-(color)
Description
Micro-Hook Test Connector
Construction: One-piece beryllium copper, gold-plated conductor
and hook. Made for connections over component leads up to
.025” (.635mm) diameter. Durable nylon body and plunger.
Stainless steel compression coil spring provides approximately 8
ounces (227 grams) contact pressure.
Part is field serviceable (see page 1).
Colors: Available in 10 colors. See inside back cover for details.
XM
Actual Size
The XM Micro-Hook is designed for use where weight and leverage may
damage components. Its lightweight body (less than 1 gram) and hypo-action
easily allows for direct hook up to delicate wires and components. Insulation
to a single contact point assures accurate readings and the barrier on the tip
prevents shorting between components.
XM NON-MAGNETIC
Part Number
XM-NM-(color)
Description
Non-Magnetic, Micro-Hook
Construction: Identical to standard XM model except spring is non-
magnetic.
Note: Add -NM after part number to indicate non-magnetic XM hook.
(ex. XM-NM-color ).
XM MICRO HOOK WITH .025” SQUARE PIN
Part Number
Description
XM25-(color) XM with .025” Square Pin
Construction: Identical to standard XM model except a one-piece gold-
plated beryllium copper blade forms hook, conductor and .025”
(.635mm) square pin. Pin is accessible through lead exit slot in plunger
and permits connection to .025” square or .030” round sockets.
E-Z-Hook lead options: Use with .025” or .030” socket patch cords on
pages 52-53.
XM HIGH TEMPERATURE
Part Number
XMX-(color)
Description
High Temperature Micro-Hook
Construction: Identical to standard XM model except body and plunger are
molded of mineral reinforced nylon for maximum temperature of 150^OC
(300^OF) over short time cycles. Over extended time periods, maximum
temperature is 122^OC (250^OF). Resistant to a wide variety of oils, solvents
and chemicals.
Colors: Black and white.
XM MICRO HOOK WITH .025” SQUARE PIN, STAINLESS STEEL
Part Number
Description
XM25SS-(color) XM with .025” Square Pin, Stainless Steel
Construction: Identical to XM25 model except blade is stainless steel.
E-Z MICRO-LOCK HOOK: XG
Part Number
XG25-(color)
XG31-(color)
XG40-(color)
For PC Board
Dimensions
Hole Diameters
A
.025” (.635mm) .023”
.027” (.686mm) (.584mm)
.031” (.787mm) .028”
.033” (.838mm) (.711mm)
.040” (1.016mm) .034”
.042” (1.066mm) (.863mm)
Construction: One-piece beryllium copper, gold-plated conductor
and closed-design hook in 3 sizes to fit specific PC board holes.
See part number box above. Durable nylon body and plunger.
Stainless steel compression coil spring provides approximately 8
ounces (227 grams) contact pressure.
Colors: Available in 10 colors. See inside back cover for details.
www.e-z-hook.com
XG
Actual Size
Fits diameters
.025” ( 635mm) to
.027” ( .638mm)
Fits diameters
.031” ( 787mm) to
.033” ( 838mm)
Fits diameters
.040” (l.016mm) to
.042” (1.066mm)
The E-Z-Micro-Lock XG series test connectors are designed to slip into plated-
through PC board test point holes and lock onto the board freeing your hands
and providing a safe, sure, short-free test connection. Available in 3 sizes to fit
holes ranging from .025” (.635mm) to .042” (1.066mm) diameters.
6