9202-S Datasheet, PDF (60/122 Pages) List of Unclassifed Manufacturers – E-Z-Hook is dedicated to providing quality parts, delivered on-time at reasonable prices

E-Z-LINK .025" SQUARE SOCKET CONTINUOUS JUMPERS
Spacing
Centers
2"
3”
4”
5”
6”
Gold-Plated
Connector
Part Number
L2-025-(color)
L2-050-(color)
L2-100-(color)
L2-250-(color)
L3-025-(color)
L3-050-(color)
L3-100-(color)
L3-250-(color)
L4-025-(color)
L4-050-(color)
L4-100-(color)
L4-250-(color)
L5-025-(color)
L5-050-(color)
L5-100-(color)
L5-250-(color)
L6-025-(color)
L6-050-(color)
L6-100-(color)
L6-250-(color)
Links
per
Chain
25
50
100
250
25
50
100
250
25
50
100
250
25
50
100
250
25
50
100
250
Tin-Plated
Connector
Part Number
LT2-025-(color)
LT2-050-(color)
LT2-100-(color)
LT2-250-(color)
LT3-025-(color)
LT3-050-(color)
LT3-100-(color)
LT3-250-(color)
LT4-025-(color)
LT4-050-(color)
LT4-100-(color)
LT4-250-(color)
LT5-025-(color)
LT5-050-(color)
LT5-100-(color)
LT5-250-(color)
LT6-025-(color)
LT6-050-(color)
LT6-100-(color)
LT6-250-(color)
E-Z-Link continuous jumpers are designed to facilitate pre-testing back
panel layouts before final wire wrapping. They eliminate costly in-plant
measuring, stripping and crimping. E-Z-Links individually fit over standard
wire wrapped pins to form any desired network.
Connector Construction:
Brass body. Gold or tin-plated beryllium copper contact spring.
Lead Wire:
28 AWG PVC.
Colors: Available in 10 colors.
Assembly: Each connector crimped onto lead wire and insulated with .75”(19mm)
heat shrink sleeve.
Ordering information:
Part No.- # of links-color ( Ex. L4-050-BLK or LT2-100-BLK)
Available in 25, 50, 100, and 250 link sets. When ordering 25 and 50
links please use 025 and 050 to indicate number of links.
E-Z-Links are available with insulated .025” (.635mm) square
socket connectors evenly spaced on 2" (50.4mm), 3” (76.2mm),
4” (101.6mm), 5” (127mm), or 6” (152mm) centers.
TAP-A-DIP TEST CONNECTORS
ENLARGED DETAIL OF WIPING ACTION
OF CONTACTS AND POSITIVE LOCK-ON
FEATURES OF THE TAP-A-DIP
Part Number
300-14
300-16
Description
14-pin Tap-A-Dip
16-pin Tap-A-Dip
POSITIVE
LOCK-ON DESIGN
End contacts of
TAP-A-DIP lock
under each of the
end leads on the DIP.
Allows
interconnection from
TAP-A-DIP to test
points without
danger of popping
off or causing shorts.
SPECIFICATIONS:
CONTACTS: One-piece .025”(.635mm) square gold-plated beryllium copper spring wire bonded in place.
END CONTACTS—Lock-on under end leads of DIP.
INBOARD CONTACTS—Slide-on. Wiping action against DIP legs.
LEAD SPACING: .100” (2.54mm) lead spacing on .300” (7.62mm) row centers.
BODY CONSTRUCTION: High strength, molded plastic with barrier strips for insulation between contacts.
WIPING ACTION
Shaped gold-plated
beryllium copper
contact springs
provide complete
wiping action.
Assuring positive
contact with leads
on DIP.
57
Order Desk: 1 (800) 995-HOOK