9202-S Datasheet, PDF (16/122 Pages) List of Unclassifed Manufacturers – E-Z-Hook is dedicated to providing quality parts, delivered on-time at reasonable prices

E-Z-MINI-HOOK: XR
Part Number
XR-(Color)
Description
Mini-Hook XR Test Connector
Standard Model Construction:
Body and plunger made of durable nylon. One-piece beryllium
copper, Gold-plated conductor and hook. Contact thickness of
hook is .025” (.635mm). Hook fits over component leads up to
.059” (1.5mm) diameter. The hook is insulated to a single
contact point to assure accurate readings. Stainless steel
compression coil spring provides approximately 12 ounces (340
grams) contact pressure.
Part is field serviceable (See page 1).
Colors: Available in 10 colors. See inside back cover for details.
STANDARD RECTANGULAR HOLE TIP
XR
Actual Size
The mid-size XR hook bridges the gap between the general purpose X100W
and the macro-hook XH model. The hook thickness has been increased for
added strength and durability and widened to fit over larger components.
STANDARD PLUNGER
XR25 WITH .025” SQUARE PIN
XR WITH PLUNGER FOR HEAVY LEAD WIRE
Part Number
XR25-(color)
Description
Mini-Hook XR with .025” Square Pin
Construction: Identical to standard XR model except a square post is
accessible through lead exit hole in plunger. Post is designed for easy
snap-on connection to .025” (.635mm) square or .030” (.762mm)
diameter patch cords.
E-Z-Hook lead options: Use with .025” or .030” socket patch cords on
pages 52-53.
XR WITH HEAVY SPRING
Part Number
XRZ-(color)
Description
Mini-Hook XR with Heavy Spring
Construction: Identical to standard XR model except stainless steel
compression coil spring provides approximately 27 ounces (765 grams)
contact pressure.
Part Number
XRA-(color)
Description
Mini-Hook XR for Heavy Lead Wire
Construction: Identical to standard XR model except lead exit hole
in plunger has been increased to .165” (4.19mm) to accommodate
heavier gauge lead wires.
XR NON-MAGNETIC
Part Number
XR-NM-(color)
XR25-NM-(color)
XRA-NM-(color)
Description
Non-Magnetic XR
Non-Magnetic .025” Square Pin XR
Non-Magnetic Heavy Lead XR
Construction: Identical to standard XR model except spring is non-
magnetic.
Note: Add -NM after any XR style part number to indicate non-
magnetic XR hook. (ex. XR -NM - color ).
13
Order Desk: 1 (800) 995-HOOK