1010L-002 Datasheet, PDF (9/9 Pages) List of Unclassifed Manufacturers – DIGITAL ACCELEROMETER

APPLICATION NOTE
Model 1010 Digital Accelerometer
ACCELERATION THRESHOLD DETECTION:
For applications where it is desired to know when acceleration has exceeded a threshold value, the simple circuit shown
in the schematic (below) can be used. This circuit uses a 74HC161 synchronous binary counter to detect when the DIR
logic output goes high for a minimum of 16 clock cycles in a row. The 74HC74 D-type flip/flop is connected in a "ones-
catch" configuration so that once the threshold is exceeded, the flip/flop stores the event. The clear input sets the counter
value to zero and clears the flip/flop, making the circuit ready to detect the next 16 ones in a row sequence. When driven
by the DIR (true) output, this circuit provides a threshold of approximately 7/8_th_s_ of full scale (+43.75g for a ±50g device).
Negative acceleration pulses can be detected by connecting the counter to DIR instead of DIR.
THRESHOLD DETECTION CIRCUIT
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Silicon Designs, Inc. ! 1445 NW Mall Street, Issaquah, WA 98027-5344 ! Phone: [phone] ! Fax: [phone]
web site: www.silicondesigns.com
[page 9]
Mar 07