UMFT60X Datasheet, PDF (8/24 Pages) List of Unclassifed Manufacturers – UMFT60x FIFO TO USB 3.0 Bridge Evaluation Board

UMFT60x FIFO TO USB 3.0 Bridge Evaluation Board
Version 1.0
Document Reference No.: FT_001191 Clearance No.: FTDI#457
2.2 Connectors, Jumpers and Push Buttons
Connectors, jumpers and push buttons are described in the following sections.
2.2.1 CN1 - Micro USB3.0 Receptacle
Pin No.
Name
Type
Description
1
VBUS
P
5V DC power supply
2
D-
IO
USB D- line
3
D+
IO
USB D+ line
4
ID
IO
OTG identification(N.C.)
5
GND
P
Ground
6
SSTX-
O
Super Speed USB transmitter differential pair (-)
7
SSTX+
O
Super Speed USB transmitter differential pair(+)
8
GND
P
Ground
9
SSRX-
I
Super Speed USB receiver differential pair (-)
10
SSRX+
I
Super Speed USB receiver differential pair (+)
Table 2.1 CN1 - Micro USB3.0 Pin-out
2.2.2 CN2 – POWER JACK 2.1MM
Optional external DC 5V input.
Pin No.
1
2
3
Name
Type
Description
5V
P
5V power supply
GND
P
Ground
GND
P
Ground
Table 2.2 CN2 – POWER JACK 2.1MM
2.2.3 JP1 – External/VBUS Powered Selection
Select whether the module power is supplied by an external DC 5V or VBUS. Note this setting
must be chosen in conjunction with the JP2 setting. Default is open^{. [Note]}
Jumper position
Description
Short pin 1-2
Select VBUS Power
Short pin 2-3
Select external DV 5V
Table 2.3 JP1 – 5V input Options
Copyright © 2015 Future Technology Devices International Limited
7