UMFT60X Datasheet, PDF (5/24 Pages) List of Unclassifed Manufacturers – UMFT60x FIFO TO USB 3.0 Bridge Evaluation Board

UMFT60x FIFO TO USB 3.0 Bridge Evaluation Board
Version 1.0
Document Reference No.: FT_001191 Clearance No.: FTDI#457
Figure 2-4 UMFT601X Module Top and Bottom View
The main functions of the UMFT60xx module are as follows:
 Provides Multi-channel FIFO mode and 245 Synchronous FIFO mode Protocols, configured
by GPIOs.
 Configurable FIFO clock: 66.67MHz and 100MHz (100MHz only for 2.5V or 3.3V VCCIO),
default clock is 100MHz.
 High speed FIFO bus interface: FMC (Low Pin Count) and HSMC optional. See Ordering
Information.
 Jumpers selection allowing powered options: VBUS-powered, External DC-powered, FIFO
master board-powered.
 Multi voltage VCCIO option:1.8V, 2.5V, 3.3V.
 Configurable GPIOs.
 Hardware reset and remote wake up support.
 Available with 16bit and 32bit wide FIFO bus.
Copyright © 2015 Future Technology Devices International Limited
4