GX-5SU Datasheet, PDF (8/16 Pages) List of Unclassifed Manufacturers – Cylindrical Inductive Proximity Sensor Amplifier Built-in

Cylindrical Inductive Proximity Sensor GX-U SERIES GX-FU SERIES GX-N SERIES
802
I/O CIRCUIT AND WIRING DIAGRAMS
GX-□U(B)
I/O circuit diagram
Color code Bleeder resistance
(Brown) Output
Load
Tr
ZD
3 to 70 mA in ON state (Note)
0.8 mA in OFF state
+ 12 to 24 V DC
3 V in ON state
–
+10
–15
%
(Blue) 0 V
Load
Internal circuit
Users’ circuit
Note: The maximum load current varies depending on the ambient temperature.
70
35
3
–25
+55
–13 _{Ambient temperature (°C °F)} +131
Symbols ... ZD: Surge absorption zener diode
Tr : PNP output transistor
+70
+158
GX-□U(B)-J  GX-F□U-J
I/O circuit diagram
Color code of mating cable / Connector pin No.
Bleeder resistance
(Brown / 1)
Output
Load
Tr
ZD
3 to 70 mA in ON state (Note 2)
0.8 mA in OFF state
+ 12 to 24 V DC
3 V in ON state
–
+10
–15
%
(Blue / 2,4) 0 V ^Load
(Note 1)
Internal circuit
Users’ circuit
Notes: 1) T his is when the mating cable CN-22G-C□ is connected. The connecter
pins No.2 and No.4 are short-circuited inside the mating cable
connecter. However, when the mating cable CN-24-C□ is connected;
GX-□U-J (normally open): (Black / 4) 0 V
GX-□UB-J (normally closed): (White / 2) 0 V
2) The maximum load current varies depending on the ambient
temperature.
70
35
3
–25
+55
–13 _{Ambient temperature (°C °F)} +131
+70
+158
Conditions for the load
1) T he load should not be actuated by the leakage current (0.8 mA) in
the OFF state.
2) T he load should be actuated by (supply voltage – 3 V) in the ON state.
3) The current in the ON state should be between 3 to 70 mA DC.
In case the current is less than 3 mA, connect a bleeder resistance
in parallel to the load so that a current of 3 mA, or more, flows.
Symbols ... ZD: Surge absorption zener diode
Tr : PNP output transistor
FIBER
SENSORS
LASER
DC 2-wire type ^SENSORS
Wiring diagram
Color code
Bleeder resistance
Brown
Load
Blue
Load
+ 12 to 24 V DC
–
+10
–15
%
Conditions for the load
1) T he load should not be actuated by the leakage current (0.8 mA) in
the OFF state.
2) T he load should be actuated by (supply voltage – 3 V) in the ON state.
3) The current in the ON state should be between 3 to 70 mA DC.
In case the current is less than 3 mA, connect a bleeder resistance
in parallel to the load so that a current of 3 mA, or more, flows.
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
Wiring diagram
Spatter-resistant of DC 2-wire type
Color code of mating cable / Connector pin No.
Bleeder resistance
Brown / 1 _Load
Blue / 2,4
(Note)
Load
+ 12 to 24 V DC
–
+10
–15
%
Note: T his is when the mating cable CN-22G-C□ is connected. The connecter
pins No.2 and No.4 are short-circuited inside the mating cable connecter.
However, when the mating cable CN-24-C□ is connected;
GX-□U-J (normally open): Black / 4
GX-□UB-J (normally closed): White / 2
Connector pin position
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
GX-□U-J (Normally open)
2
Not connected
3
Not connected
1
+V
4
0V
GX-□UB-J (Normally closed)
2
0V
3
Not connected
1
+V
4
Not connected
Mating cable
CN-22G-C□
Mating cable
CN-24-C□
Mating cable
CN-22G-C□
Mating cable
CN-24-C□
Color code of
mating cable /
Connector pin No.
(Brown / 1) Output
(Blue / 2,4) 0 V (Note)
Color code of
mating cable /
Connector pin No.
(Brown / 1) Output
White
Blue
Not connected
(Black / 4) 0 V
Color code of
mating cable /
Connector pin No.
(Brown / 1) Output
(Blue / 2,4) 0 V (Note)
Color code of
mating cable /
Connector pin No.
(Brown / 1) Output
Black
Blue
Not connected
(White / 2) 0 V
GX-F□U-J (Spatter-resistant type) _{Mating cable}
CN-22G-C□
Color code of
mating cable /
Connector pin No.
2
Not connected
3
Not connected
1
+V
(Brown / 1) Output
(Blue / 2,4) 0 V (Note)
Note: The connecter pins No.2 and No.4 are short-
4
circuited inside the mating cable connector.
0V
Selection
Guide
Amplifier
Built-in
Amplifier-
separated
GX-F/H
GXL
GL
GX-U/GX-FU/
GX-N
GX