RF63 Datasheet, PDF (70/91 Pages) List of Unclassifed Manufacturers – Ultra-Low Power Integrated UHF Transceiver

ADVANCED COMMUNICATIONS & SENSING
7.3.4. Receiver Frequency Hop Optimized Cycle
RF63
IDD
IDDR
3mA typ
RF63
IDDFS
1.3mA typ.
Wait
TS_RE
Wait
TS_HOP
RF63 is now ready
for data reception
Time
Set RF63 back in Rx mode
RF63 is in Rx mode
On channel 1 (R1/P1/S1)
1. Set R2/P2/S2
2. Set RF63 in FS mode, change
MCParam_Band if needed, then switch
from R1/P1/S1 to R2/P2/S2
Figure 52: Rx Hop Cycle
Note: it is also possible to move from one channel to the other one without having to switch off the receiver. This
method is faster, and overall draws more current. For timing information, please refer to TS_RE_HOP on Table 8.
Page 70 of 91
Tel: [phone] Fax: [phone] E-mail: [e-mail] http://www.hoperf.com