M02097-11 Datasheet, PDF (7/21 Pages) M/A-COM Technology Solutions, Inc. – 3.3/5V LED Driver / Limiting Amplifier for Operation to 500 Mbps

Product Specification
1.4.2
AC Electrical Characteristics - Limiting Amplifier
V_CCR = 3.05 to 3.55V or 4.7 to 5.5V, T_A = -40°C to +95°C, unless otherwise noted.
Table 1-6. AC Electrical Characteristics - Limiting Amplifier
Symbol
Parameter
Conditions
Minimum
V_IN(MIN) Differential Input Sensitivity
V_I(MAX) Input Overload
BER < 10^-12 at 1.25 Gbps with K28.5 pattern
BER < 10^-12, differential input
BER < 10^-12, single-ended input
2
1200
600
V_N RMS Input Referred Noise
–
V_LOS LOS Programmable Range
Differential inputs, 6.0 kΩ ≤ R_STSET ≤ 8.4 kΩ
5
HYS Signal Detect Hysteresis
(electrical); signal detect level set to 20 mV_PP
2
RSSIpp Peak-to-peak received signal
4
strength indicator range
BW_LF Small-Signal -3dB Low
Excluding AC coupling capacitors
–
Frequency Cutoff.
DJ Deterministic Jitter
K28.5 pattern at 500 Mbps
–
RJ Random Jitter
10 mV_PP input
–
t_r / t_f Data Output Rise and Fall Times 20% to 80%; outputs terminated into 50Ω;
–
10mV_PP input
T_{LOS_ON} Time from LOS state until LOS LOS assert time after 1 V_PP input signal is turned
2.3
output is asserted
off; signal detect level set to 10 mV
T_{LOS_OFF} Time from non-LOS state until LOS deassert time after input crosses signal
2.3
LOS is deasserted
detect level; signal detect set to 10 mV with
applied input signal of 20 mV_PP
Typical
–
–
–
–
–
4
–
4
–
3
–
–
–
Maximum Units
–
mV
–
mV
–
285
µV_RMS
55
mV
6
dB
100
mV
–
kHz
50
ps
–
ps_RMS
250
ps
80
µs
80
µs
02097-DSH-001-C
Mindspeed Technologies^®
5
Preliiminary Information/Mindspeed Proprietary and Confidential