M02097-11 Datasheet, PDF (6/21 Pages) M/A-COM Technology Solutions, Inc. – 3.3/5V LED Driver / Limiting Amplifier for Operation to 500 Mbps

Product Specification
1.4
AC Characteristics
1.4.1
AC Electrical Characteristics - LED Driver
V_CCT = 3.05 to 3.55V or 4.7 to 5.5V, T_A = -40°C to +95°C, unless otherwise noted.
Typical values are V_CC = 3.3V, IPB_OUT = 4mA, I_MOD = 50mA.
Table 1-5. AC Electrical Characteristics - LED Driver
Symbol
Parameter
Conditions
Minimum Typical Maximum Units
I_MOD
I_MOD(OFF)
Modulation current adjust range
Modulation current with output
disabled
To meet AC specifications
DIS = high
30
–
120
mA_PP
–
–
150
µA
I_MOD-TC
Ratio of modulation current to
MOD_SET current
Programmable range for
modulation current temperature
coefficient
Adjustable using TC_SLOPE
–
140
–
A/A
0
–
10⁴
ppm/°C
T_TCSTRT
Programmable temperature at
which modulation current TC
compensation enables
Based on value set for TC_START
-40⁽²⁾
–
95
°C
20% to 80%. Measured using alternating 1111-
t_R / t_F Modulation output rise / fall
0000 pattern at 500 Mbps; 5Ω load with 12pF/
–
times
35Ω between OUTP and OUTN
200
500
ps
OS Overshoot of modulation output Into 5Ω load with 12pF/35Ω between OUTP and
–
10
–
%
OUTN
RJ Random jitter
–
DJ Modulation output deterministic into 5Ω load (includes pulse width distortion)
–
jitter
2²³ - 1 PRBS at 500 Mbps
0.8
–
ps_RMS
30
60
ps_PP
NOTES:
1. Minimum voltage at OUTP > 0.7 V; LED forward voltage and total series resistance must be considered if output is DC coupled to LED.
2. Default if TC_START is floating.
02097-DSH-001-C
Mindspeed Technologies^®
4
Preliiminary Information/Mindspeed Proprietary and Confidential