G100R3278 Datasheet, PDF (6/8 Pages) List of Unclassifed Manufacturers – Manual Wire Wrapping Tools Users Guide

Maintenance Procedure:
Manual Wire Wrapping Tools
Periodic Maintenance:
The only required maintenance is periodic greasing of the gear
assembly. The interval is dependent on use. For reference we suggest
every 50,000 wraps or every 6 months which ever comes first.
Tools Required:
1. Philips Head Screwdriver.
2. Synthetic Grease (Such as: Chemplex 940 from NFO Technologies).
Disassembly:
1. Using a Philips head screwdriver, remove the 5 screws that hold the
housing together. Note the type and location of the screws.
2. Turn the gun over and lay it down on a flat surface so the nose
piece is facing left. Separate the housings and remove the collet and
nose piece. Note: Use a flat head screwdriver to separate the hous-
ings.
6