G100R3278 Datasheet, PDF (4/8 Pages) List of Unclassifed Manufacturers – Manual Wire Wrapping Tools Users Guide

How to make A Wire Wrapped Connection:
Step 1:
Select the Proper Bit and
Sleeve for the Wire Being used
Step 2
Insert the wire into the
Wire Slot
Step 3
Anchor the Wire
Step 4
Insert the terminal
Step 5
Finished connection
Some Hints on Making Wrapped Connections
Overwrap
Easy Does It!
Do not press too hard. Let the OK tools
do the work. Excessive pressure can
lead to overwrapping. Backforce "BF"
to prevent overwrapping is available
on most power tools and is recom-
mended for use with 26
through 30 AWG wire.
Insufficient
Turns
Feed Wire Correctly!
It’s easy to feed wire into the slot in
the OK bit correctly. Be sure the
stripped end of the wire is “pushed-in”
all the way.
Open
Wrap
Spiral
Wrap
Stay With It!
Just keep the OK tool on the terminal
until the wrap is complete. Early
removal can result in spiral and open
wraps.
Pigtail
Use the Correct Bit and
Sleeve!
Wire wrapping is a precision technique
and the wrong bit and sleeve just can-
not do the job. Improper selection can
cause problems ranging from “Pigtails”
to loose wraps.
4