GMBHR168 Datasheet, PDF (57/70 Pages) List of Unclassifed Manufacturers – Mini BLOCK Housing 16 opto inputs, 8 Relay outputs

ITALIAN TECHNOLOGY
grifo^®
EXTERNAL CARDS
GMB HR168 can be connected to all 28 pins and 40 pins Mini Modules and operator interface system
produced by grifo^®. The on board resources can be expanded with a simple connection to the
numerous peripheral grifo^® boards.
Connection to the field is easy because performed through standard connectors, that allow a prompt
replacements with different models, also superior.
As an example, here follows a short list of peripheral grifo^® boards with description and overall
features, for further information please contact grifo^® directly.
GMM AC2
grifo^® Mini Module with Atmel T89C51AC2
This grifo^® Mini Module has a 40 pin connector and it is based on Atmel T89C51AC2 CPU with
32K FLASH; 256 Byte RAM;1K ERAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timers
Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture);
32 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL serial line; I2C BUS; 2 status LEDs; configuration
Dip switch; etc.
GMM AM32
grifo^® Mini Module with Atmel ATmega32
This grifo^® Mini Module has a 40 pin connector and it is based on Atmel ATmega32L CPU with
32K FLASH; 2K SRAM; 1K EEPROM; 3 Timer Counter eand 2 Programmable Counter Array
channels; 4 PWM; 8 A/D; 1 Comparator; RTC + 240 Bytes SRAM, backed by Lithium battery; I2C
BUS; Master/Slave SPI Serial Interface; JTAG Interface; 32 TTL I/O lines; RS 232 or TTL serial
line; 2 status LEDs; configuration Dip switch; etc.
GMM 4620
grifo^® Mini Modulo PIC 18F4620
This grifo^® Mini Module has a 40 pin connector and it is based on CPU Microchip PIC 18F4620 with
64K FLASH; 4K SRAM; 1K EEPROM; 3 Timer Counter; 2 PWM; RTC + 240 Bytes SRAM,
backed by Lithium battery; 13 A/D; 1 Comparator; I²C BUS; Master/Slave SPI; 33 signals I/O TTL;
RS 232 or TTL; 2 status LEDs; etc.
EXPS-2
EXternal Power Supply 2 tensioni
Mains power supply 75x55x90 mm with plastic container. Input voltage: 230 Vac, 50 Hz. Output
voltages: 20 Vdc, 200 mA e 15 Vac, 300 mA galvanically isolated. Standard wall plug for input power
supply.
QTP G28
Quick Terminal Panel - LCD Graphic, 16 LEDs, 28 keys
LCD display 240x128 pixels, CFC backlit; Optocoupled RS 232 line and additional RS 232/422/485/
C. L. line; CAN line controller; E² for set up; RTC and RAM lithium backed; primary graphic object;
possibility of re-naming keys, LEDs and panel name; 28 keys and 16 LEDs with blinking attribute
and buzzer manageable by software; Buzzer; built-in power supply; reader of magnetic badge and
relay option.
GMB HR168 Rel. 5.00
Page 49