GMBHR168 Datasheet, PDF (20/70 Pages) List of Unclassifed Manufacturers – Mini BLOCK Housing 16 opto inputs, 8 Relay outputs

grifo^®
ITALIAN TECHNOLOGY
ZC1 - CONTROL DEVICE SOCKET
ZC1 is a 40 pin, 600 mils DIL socket.
Its purpose is to install the interlligent hardware module that manages all GMB HR 168 on board
signals (reads optocoupled inputs, set relays outputs, etc.).
Hardware strucuture of GMB HR 168 is designed for use with grifo^® Mini Modules. If you are using
a combination GMB HR 168 + grifo^® Mini Module please refer to its specific manual.
If you want to develop a new hardware or you have to check hardware compatibility of an existing
board, please refer to the following figure, that shows which on board hardware resource is connected
to each signal of 40 pins socket ZC1.
For further details about hardware, please refer to following paragraphs.
For further details about hardware, please refer to chapter "PERIPHERAL DEVICES SOFTWARE
DESCRIPTION".
For purpose of jumpers, please refer to chapter "JUMPERS".
MM PIN1 , IN1-2 of CN2 1
MM PIN2 , IN2-2 of CN2 2
MM PIN3 , IN3-2 of CN2 3
MM PIN4 , IN4-2 of CN2 4
MM PIN5 , pin 2 of CN7 5
MM PIN6 , pin 3 of CN7 6
MM PIN7 , Vref 7
MM PIN8 , N. C. 8
MM PIN9 , RX 9
MM PIN10 , TX 10
MM PIN11 , pin 4 of CN7 11
MM PIN12 , SCL , pin 2 of CN8 12
MM PIN13 , SDA , pin 3 of CN8 13
MM PIN14 , OUT C1 14
MM PIN15 , OUT C2 15
MM PIN16 , pin 5 of J10 16
MM PIN17 , pin 1 of J10 17
MM PIN18 , OUT D1 18
MM PIN19 , IN8-1 of CN1 19
MM PIN20 , GND 20
ZC1
40 MM PIN40 , +5 Vdc
39 MM PIN39 , N. C.
38 MM PIN38 , IN8-2 of CN2
37 MM PIN37 , IN7-2 of CN2
36 MM PIN36 , IN6-2 of CN2
35 MM PIN35 , IN5-2 of CN2
34 MM PIN34 , +5 Vdc
33 MM PIN33 , pin 1 of J11
32 MM PIN32 , IN1-1 of CN1
31 MM PIN31 , IN2-1 of CN1
30 MM PIN30 , pin 6 of CN7 , pin 3 of J10
29 MM PIN29 , OUT A1
28 MM PIN28 , OUT A2
27 MM PIN27 , OUT B1
26 MM PIN26 , OUT B2
25 MM PIN25 , IN2-1 of CN1
24 MM PIN24 , IN4-1 of CN1
23 MM PIN23 , IN5-1 of CN1
22 MM PIN22 , IN6-1 of CN1
21 MM PIN21 , IN7-1 of CN1
FIGURE 4: ZC1 - CONTROL DEVICE SOCKET
Page 12
GMB HR168 Rel. 5.00