GMBHR168 Datasheet, PDF (47/70 Pages) List of Unclassifed Manufacturers – Mini BLOCK Housing 16 opto inputs, 8 Relay outputs

ITALIAN TECHNOLOGY
3 PINS JUMPERS
grifo^®
JUMPER
J1, J2
J5
J6
J7
J8
J11
CONNECTION
PURPOSE
DEF.
position 1-2
Select type NPN for optocoupled inputs of CN1
and CN2.
position 2-3
Select type PNP for optocoupled inputs of CN1 and
CN2.
*
position 1-2
Connects DIR signal to enable RS 485
communication.
position 2-3
Connects DIR signal to enable RS 422
communication.
*
position 1-2 ^{Connects pin 5 of connector CN6, to serial line in}
RS 422, RS 485 .
position 2-3
Connects pin 5 of connector CN6, to serial line in
RS 232, TTL.
*
Connects pin 3 of connector CN6, to serial line in
position 1-2 _{RS 422, RS 485.}
*
position 2-3
Connects pin 3 of connector CN6, to serial line in
RS 232, TTL.
position 1-2
Connects signal MM PIN 9 (that is serial reception
signal in RS 232 or TTL of Mini Module) to RS
422, RS 485 or current loop drivers.
position 2-3
Connects signal MM PIN 9 (that is serial reception
signal in RS 232 or TTL of Mini Module) to pin 3
of J6.
Connects signal MM PIN 33 directly to pin 8 of
position 1-2 CN7, that is selects range 2.5 Vdc for analog input *
signal of a grifo^® Mini Module.
position 2-3
Connects signal MM PIN 33 to pin 8 of CN7
through a voltage divider, that is selects range 10
Vdc for analog input signal of a grifo ^® Mini
Module.
FIGURE 33: 3 PINS JUMPERS TABLE
GMB HR168 Rel. 5.00
Page 39