PL3120 Datasheet, PDF (5/13 Pages) List of Unclassifed Manufacturers – Line Smart Transceivers

®
Pin Name
E
A0-A15
Type
Output
Output
Pin Functions
Enable clock control output for external memory
Memory address output port
PL 3120-E4T10
38 TSSOP Pin No.
N/A
N/A
V_DD5
V_DD5A
GND
ICTMode
Power
Power
Power
Digital Input
PKD
Digital Output
BIU
Digital Output
RXIN
Analog Input
INTIN,INTOUT Analog I/O
RXC
Analog Input
OOGAS
Analog Input
VCORE
TXON
TXDAC
TXSENSE
TXBIAS
Power
Digital Output
Analog Output
Analog Input
Analog Output
Power input (5V nom). All V_DD5 pins must be
connected together externally.
Power input (5V nom). Supplies on-chip analog
circuitry.
Power input (0V, GND). All GND pins must be
connected together externally.
In-circuit test mode control. Driving ICTMode high and
RESET low will place all outputs in high impedance mode
for in-circuit test. Tie to GND for normal operation.
Packet Detect LED driver.
Band in Use LED driver.
Receiver input.
Integrator input and output.
Receive signal.
Comparator to detect when energy storage power supply
lacks sufficient energy to transmit a packet. Tie to VCORE
if not used.
Output of internal 1.8V regulator. Requires 0.1µF
external capacitor.
High when transmitting. Used to drive LED to show
packet transmission.
Transmit waveform DAC output.
Transmit amplifier sense feedback.
Transmit amplifier bias generator.
13, 27, 37
19
1, 23, 28, 38
32
21
22
15
17, 18
16
14
20
31
26
25
24
Recommended Operating Conditions
Symbol
V_DD5
V_DD5A
T_A
F_A-band
F_C-band
Parameter
V_DD5 Supply Voltage
V_DD5A Supply Voltage
Ambient Temperature
XIN Frequency for A-band Operation
(6.5536MHz ±200ppm)
XIN Frequency for C-band Operation
(10.0000MHz ±200ppm)
Min.
4.75
4.60
-40
6.5523
9.9980
Typ.
5.00
5.00
25
6.5536
10.0000
Max.
5.25
5.25
85
6.5549
10.0020
Electrical Characteristics (over recommended operating conditions)
Symbol
V_IL
V_IH
V_OL
V_OH
V_hys
I_in
Parameter
Digital Input Low-Level Voltage
Digital Input High-Level Voltage
Digital Output Low-Level Voltage
I_out<20µA
IO4-IO11, A0-A14, D0-D7, R/W, E (I_OL = 1.4mA)
IO0-IO3, SERVICE, RESET (I_OL= 20mA)
IO0-IO3, SERVICE, RESET (I_OL = 10mA)
PKD, BIU, TXON (I_OL= 12mA)
Digital Output High-Level Voltage
|I_out|<20µA
IO4-IO11, A0-A14, D0-D7, R/W, E (I_OH = -1.4mA)
IO0-IO3, SERVICE, RESET (I_OH = -1.4mA)
PKD, BIU, TXON (I_OH = -12mA)
Digital Input Hysteresis
Input Current (Excluding Pull-ups)²
Min.
Typ.
Max.
0.8
2.0
0.1
0.4
0.8
0.4
0.5
V_DD5-0.1
V_DD5-0.5
V_DD5-0.4
V_DD5-0.5
175
-10
10
NOTE:2 IO4-IO7 and SERVICE pins have configurable pull-ups. The RESET pin has a permanent pull-up.
PL 3150-L10
64 LQFP Pin No.
17
38, 39, 40, 41, 42, 43,
44, 45, 57, 58, 60, 59,
53, 56, 55, 54
18, 32, 51
24
28, 33, 52, 61
46
26
27
20
22, 23
21
19
25
36
31
30
29
Unit
V
V
ºC
MHz
MHz
Unit
V
V
V
V
mV
µA
www.echelon.com