A-4598 Datasheet, PDF (48/52 Pages) List of Unclassifed Manufacturers – Tools for Telecom, Fiber Optics, CATV, Wireless and Electronics Industries

ALIGNMENT TOOLS
AT-3112
AT-6241
AT-3767
SPUDGER
Plastic pencil type tool tapered to
a point on one end and
screwdriver tip on other end.
Used to form, shape, guide,
spudge and separate fine
computer wire terminals,
telephone wires and cables. Also
used for breaking solder bridges,
probing or positioning loose
components. Made of a high
impact non-conductive
thermoplastic material. 6"
double ended 5/16" diameter
long.
ALIGNMENT TOOL
2-in1 nonconductive Alignment
Tool 1/4" in diameter, stepped
down to 5/32" in diameter. Ideal
for most variable capacitors, coils
and resistors. Also used to
harness and separate fine wire
terminals in computers,
telephones and cables. Made of
non-conductive thermoplastic
material. 7" long.
JONARD
P/N
AT-6241
DESCRIPTION
Alignment Tool
JONARD
P/N
AT-3112
DESCRIPTION
Spudger
AT-3767
AT-6241
JIC-22035
TRIMPOT
Double ended Trimpot with a hex
(allen) steel .050" and 3/32" long
steel screwdriver tip. Ideal for
aligning, adjusting, calibrating and
fine tuning of electronic circuitry,
potentiometers, oscilloscopes and
electronic equipment. Made of a
high impact non-conductive
thermoplastic material. 5" long.
JONARD
P/N
AT-3767
DESCRIPTION
Trimpot
S-389M
S-389
Flat end
JIC-22035
PROBE PICK
Tough resilient yellow nylon
probe “spudger”. One end is
tapered to a 1/16” diameter point
having an insulated “L” shaped
wire hook extension. The other
end tapers to a flat, 3/16” wide
and 1/16” thick, with 2 small
notches. Used in electrical
contacts. 7” long.
JONARD
P/N
JIC-22035
JIC-22035NT
DESCRIPTION
Insulated Probe Pick
Uninsulated Probe Pick
AT-3112
S-389
ALIGNMENT TOOL KIT
This 5 piece pocket kit contains
a selection of the most popular
non-conductive tools for
aligning and adjusting
components.
AT-3767 Trimpot, AT-6241
Alignment Tool, AT-3112 Spudger,
S-389 Orange Stick, JIC-22035
Probe Pick
JONARD
P/N
DESCRIPTION
TK-AT5 Alignment Tool Kit
Sharp end
ORANGE STICKS
Static free double ended economical tool
made of birch wood. Used for cleaning
electrical components and separating
contact points, fine wires and other delicate
components. 3/16” diameter x 7” long. The
S-389 has one end tapered to a point and
the other end to a flat screwdriver type tip.
The S-389M has both ends tapered with a
flat screwdriver type tip.
JONARD
P/N
S-389/10
S-389/100
S-389M/10
S-389M/100
DESCRIPTION
Orange Sticks Point & Flat end Pk. of 10
Orange Sticks Point & Flat end Pk. of 100
Orange Sticks 2 Flat ends Pk. of 10
Orange Sticks 2 Flat ends Pk. of 100
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
48
INDUSTRIES CORP.