A-4598 Datasheet, PDF (27/52 Pages) List of Unclassifed Manufacturers – Tools for Telecom, Fiber Optics, CATV, Wireless and Electronics Industries

LONG & SHORT NOSE PLIERS
JIC-842
TELECOM LONG NOSE D PLIERS
Pliers are for general use looping, bending and
cutting. Grips small wires and parts and reaches into
tight spaces. Jaws are knurled, serrated and have side
cutting blades. Cushion gripped yellow plastic handle
6 7/8” long.
JONARD
P/N
JIC-842
DESCRIPTION
Telecom Long Nose D Pliers
LONG NOSE GENERAL USE PLIERS
Chain nose pliers for general use. Inner surface of the
jaws are knurled near the end to facilitate gripping
wire, binding post nuts etc. Orange plastic handle,
6 5/8” long. Ask for the DLONGNOSE which is
identical to the BLONGNOSE but has an aluminum
oxide insulating coating on the outside nose surface.
JONARD
P/N
BLONGNOSE
DESCRIPTION
Long Nose General Use Pliers
ELONGNOSE
BLONGNOSE
LONG NOSE GRIPPING PRESSING PLIERS
Long nose pliers for gripping and pressing. Inner
surface of the jaws are knurled near the end to
facilitate gripping wire, binding post nuts etc.
Aluminum oxide insulation coating on the outside
nose surface. The inside gripping jaws are provided
with mated grooves near the joint for use in pressing
.032/.035” brass sleeves. Orange plastic handle,
6 5/8” long.
SHORTNOSE PLIERS
Intended for use in skinning 22-24 AWG wire and
crushing insulation in nose slot. The front portion of
the jaws is narrowed, and a portion of the inner face
of one jaw is relieved to skin insulation from wire.
The inner surface of the jaws are serrated to
facilitate gripping wire. Orange plastic handle 6
3/16” long.
JONARD
P/N
BSHORTNOSE
1
DESCRIPTION
Shortnose pliers
JONARD
P/N
ELONGNOSE
DESCRIPTION
Long Nose Gripping Pressing Pliers
BSHORTNOSE
Phone: [phone] • Fax: [phone] • [e-mail]
INDUSTRIES CORP.
27