A-4598 Datasheet, PDF (39/52 Pages) List of Unclassifed Manufacturers – Tools for Telecom, Fiber Optics, CATV, Wireless and Electronics Industries

INSULATED TOOLS
Jonard Insulated Tools are manufactured to IEC 60900 Standards for
hazardous work environments. Our tools are tested to 10,000 VAC and
rated for 1,000 VAC live use.
1000V
IEC 60900
TK-110INS
JONARD
P/N
TK-110INS
DESCRIPTION
11 Piece Insulated Tool Kit
Kit contains: 7 Screwdrivers as
shown plus INP-1072, INP-2065,
INP-3062 & INP- 4065
JONARD
P/N
TK-70INS
INSULATED SCREWDRIVERS-
SLOTTED HEAD
INSULATED SCREWDRIVERS-
PHILLIPS HEAD
TK-70INS
DESCRIPTION
7 Piece Insulated Screwdriver Set
Screwdriver Set contains:
3 Philips, 4 Slotted as shown below
INSULATED WIRE STRIPPER
JONARD
P/N
DESCRIPTION
INS-475 3/32 X 3 Slotted Screwdriver
INS-4100 1/8 X 4 Slotted Screwdriver
INS-6150 1/4 X 6 Slotted Screwdriver
INS-8175 5/16 X 7 Slotted Screwdriver
INSULATED PLIERS
JONARD
P/N
DESCRIPTION
INS-180 #1 X 3 Phillips Screwdriver
INS-2100 #2 X 4 Phillips Screwdriver
INS-3150 #3 X 6 Phillips Screwdriver
JONARD
P/N
DESCRIPTION
INP-4065 Wire Stripper 6 1/2” Long
JONARD
P/N
DESCRIPTION
INP-2082 Long Nose Plier 8 1/4” Long
INP-2065 Long Nose Plier 6 1/2” Long
JONARD
P/N
DESCRIPTION
INP-3062 Diagonal Plier 6 1/4” Long
INP-3072 Diagonal Plier 7 1/4” Long
JONARD
P/N
DESCRIPTION
INP-1080 Lineman’s Combo Plier 8” Long
INP-1072 Lineman’s Combo Plier 7 1/4” Long
INP-1065 Lineman’s Combo Plier 6 1/2” Long
INDUSTRIES CORP.
134 Marbled_Cal_ae _rR_eoa_ad,_nT_duck_Uah_so_ee,_GN_uY_i1_d0_e70_f7_or•_Inw_suw_lw_a._tjo_en_dard_T._oco_om_l
Tools are not recommended for use on energized circuits. Work should only be performed by qualified professionals. Do not use this tool if the
insulation becomes damaged in any way. Tools must be kept clean and dry. Always inspect before use.
Do not touch the uninsulated portion of the tool or any conductive object when either might make contact with an energized source. Always
wear approved eye & clothing protection. Only use tools for their designed purpose and always follow OSHA 1910.333 (c)(2) and NFPA 70E 2004
when doing electrical work. Failure to observe proper safety precautions may result in serious injury or death.
Phone: [phone] • Fax: [phone] • [e-mail]
INDUSTRIES CORP.
39