CM-IMX53 Datasheet, PDF (25/31 Pages) List of Unclassifed Manufacturers – Smart Mobile Devices

Hardware User Manual - CM-i.MX53
6.4 Footprint
Last change: 10 April 2013
Version 2.3
Figure 6-4: Footprint (top view)
The footprint for Altium Designer is available on request. The used connector is FX-10A-100S/10SV from
Hirose. For detailed dimensions of the connectors please see the datasheet from the manufacturer’s web
site.
The mounting holes are designed for reflow solderable spacers SMTSO-M2-4 from PEM. For further details
regarding dimensions and paste expansion please refer the manufacturer’s website. If simple holes are
desired on the base board, identical ones as on the Core Module are recommended.
6.5 Connectors
Connector Core Module
X1, X2, X3
Manufacturer
Hirose
Manufacturer Part No.
FX-10A-100P/10SV
Table 10: Core Module connector types
The Core Module features 3 connectors. The base board has to use the opposite connectors (FX-10A-
100S/10SV).
© Bluetechnix 2013
Page | 24