JH162A Datasheet, PDF (23/25 Pages) List of Unclassifed Manufacturers – SPECIFICATIONS FOR LCD MODULE

JH162A SERIES
JEWEL HILL
16.Precautions For Use Of LCD Modules
A. Liquid Crystal Display Modules (LCM)
a. Mechanical Considerations
LCM are assembled and adjusted with a high degree of precision.
Avoid excessive shocks and do not make any alterations or
modifications. The following should be noted.
.) Do not tamper in any way with the tabs on the metal frame.
.) Do not modify the PCB by drilling extra holes, changing its outline,
moving its components or modifying its pattern.
.) Do not touch the elastomer connector (conductive rubber),
especially when inserting an EL panel.
.) When mounting a LCM make sure that the PCB is not under any
stress such as bending or twisting. Elastomer contacts are very
delicate and missing pixels could result from sligyt dislocation of
any of the elements.
.) Avoid pressing on the metal bezel, otherwise the elastomer
connector could be deformed and lose contact, resulting in missing
pixels.
b. Static Electricity
LCM contains CMOS LSI’s and the same precaution for such
devices should apply, namely:
.) The operator should be grounded whenever he comes into contact
with the module. Never touch any of the conductive parts such as
the LSI pads, the copper leads on the PCB and the interface
terminals with any part of the human body.
20 / 22